[Asterisk-video] Lifesize VC and Asterisk
CM Rahman
cmrahman at yahoo.com
Fri Feb 25 15:02:55 CST 2011
Yes. it is. If I dial direct, it is fine. but if I use asterisk as a sip proxy,
the size is smaller. Any idea why?
________________________________
From: Jamie A. Stapleton <jstapleton at computer-business.com>
To: Development discussion of video media support in Asterisk
<asterisk-video at lists.digium.com>
Sent: Fri, February 25, 2011 10:10:36 AM
Subject: Re: [Asterisk-video] Lifesize VC and Asterisk
Is lifesize being used on both ends of the call?
On Feb 24, 2011, at 10:57 AM, CM Rahman wrote:
Anybody here using asterisk and lifesize express? I am trying to use it. It
dials fine but the video size is smaller. Is there any where I can twick to get
the right video size?
Thanks
CM
________________________________
From: pankaj pandey <pankaj.niet at yahoo.com<mailto:pankaj.niet at yahoo.com>>
To: asterisk-video at lists.digium.com<mailto:asterisk-video at lists.digium.com>
Sent: Thu, February 24, 2011 5:19:29 AM
Subject: Re: [Asterisk-video] asterisk-video Digest, Vol 58, Issue 12
thanks for reply Sergio...
please find the attached log
-- Executing [90xxxxxxxx at 3G:1] h324m_call("SIP/100-b7421e80",
"90xxxxxxxx at 3Gout") in new stack
-- Executing [90xxxxxxxx at 3Gout:1] Set("Local/90xxxxxxxx at 3Gout-f57d,2",
"CHANNEL(transfercapability)=VIDEO") in new stack
-- Executing [90xxxxxxxx at 3Gout:2] NoOp("Local/90xxxxxxxx at 3Gout-f57d,2",
"transfer=VIDEO") in new stack
-- Executing [90xxxxxxxx at 3Gout:3] Set("Local/90xxxxxxxx at 3Gout-f57d,2",
"CHANNEL(userinformationlayer1)=38") in new stack
-- Executing [90xxxxxxxx at 3Gout:4] NoOp("Local/90xxxxxxxx at 3Gout-f57d,2",
"ul1=38") in new stack
-- Executing [90xxxxxxxx at 3Gout:5] Dial("Local/90xxxxxxxx at 3Gout-f57d,2",
"ZAP/g1/90xxxxxxxx") in new stack
-- Making new call for cr 32780
-- digital call, setting user information layer 1 to 38 (0x26)
-- Requested transfer capability: 0x18 - VIDEO
> Protocol Discriminator: Q.931 (8) len=36
> Call Ref: len= 2 (reference 12/0xC) (Originator)
> Message type: SETUP (5)
> [04 03 88 90 a6]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability:
>Unrestricted digital information (8)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
> User information layer 1: H.223 and H.245 (38)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan:
>0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
> [6c 05 21 80 31 30 30]
> Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony
>Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user number not
>screened (0) '100' ]
> [70 0b 80 39 30 31 33 36 38 34 32 39 33]
> Called Number (len=13) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown
>Number Plan (0) '90xxxxxxxx' ]
> [a1]ost*CLI>
> Sending Complete (len= 1)
q931.c:3245 q931_setup: call 32780 on channel 1 enters state 1 (Call Initiated)
-- Called g1/90xxxxxxxx
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 12/0xC) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive
Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
-- Processing IE 24 (cs0, Channel Identification)
q931.c:3800 q931_receive: call 32780 on channel 1 enters state 3 (Outgoing call
Proceeding)
-- Zap/1-1 is proceeding passing it to Local/90xxxxxxxx at 3Gout-f57d,2
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 12/0xC) (Terminator)
< Message type: PROGRESS (3)
< [1e 02 8a 84]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
Location: Network beyond the interworking point (10)
< Ext: 1 Progress Description: Unknown (4) ]
-- Processing IE 30 (cs0, Progress Indicator)
-- Zap/1-1 is making progress passing it to Local/90xxxxxxxx at 3Gout-f57d,2
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 12/0xC) (Terminator)
< Message type: ALERTING (1)
q931.c:3715 q931_receive: call 32780 on channel 1 enters state 4 (Call
Delivered)
-- Zap/1-1 is ringing
< Protocol Discriminator: Q.931 (8) len=12
< Call Ref: len= 2 (reference 12/0xC) (Terminator)
< Message type: CONNECT (7)
< [29 05 0b 02 18 0f 25]
< Time Date (len= 7) [ 11-02-24 15:37 ]
-- Processing IE 41 (cs0, Date/Time)
q931.c:3745 q931_receive: call 32780 on channel 1 enters state 10 (Active)
> Protocol Discriminator: Q.931 (8) len=5
> Call Ref: len= 2 (reference 12/0xC) (Originator)
> Message type: CONNECT ACKNOWLEDGE (15)
-- Zap/1-1 answered Local/90xxxxxxxx at 3Gout-f57d,2
== Spawn extension (3Gout, 90xxxxxxxx, 5) exited non-zero on
'Local/90xxxxxxxx at 3Gout-f57d,2'
< Protocol Discriminator: Q.931 (8) len=9
< Call Ref: len= 2 (reference 12/0xC) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 80 90]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location:
User (0)
< Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1)
]
-- Processing IE 8 (cs0, Cause)
q931.c:3935 q931_receive: call 32780 on channel 1 enters state 12 (Disconnect
Indication)
-- Channel 0/1, span 1 got hangup request, cause 16
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate
Disconnect Request
q931.c:3068 q931_release: call 32780 on channel 1 enters state 19 (Release
Request)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 12/0xC) (Originator)
> Message type: RELEASE (77)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location:
>Private network serving the local user (1)
> Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1)
>]
-- Hungup 'Zap/1-1'
== Auto fallthrough, channel 'SIP/100-b7421e80' status is 'UNKNOWN'
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 12/0xC) (Terminator)
< Message type: RELEASE COMPLETE (90)
q931.c:3875 q931_receive: call 32780 on channel 1 enters state 0 (Null)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
--- On Thu, 24/2/11,
asterisk-video-request at lists.digium.com<mailto:asterisk-video-request at lists.digium.com>
<asterisk-video-request at lists.digium.com<mailto:asterisk-video-request at lists.digium.com>>
> wrote:
From:
asterisk-video-request at lists.digium.com<mailto:asterisk-video-request at lists.digium.com>
<asterisk-video-request at lists.digium.com<mailto:asterisk-video-request at lists.digium.com>>
>
Subject: asterisk-video Digest, Vol 58, Issue 12
To: asterisk-video at lists.digium.com<mailto:asterisk-video at lists.digium.com>
Date: Thursday, 24 February, 2011, 3:48 AM
Send asterisk-video mailing list submissions to
asterisk-video at lists.digium.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.digium.com/mailman/listinfo/asterisk-video
or, via email, send a message with subject or body 'help' to
asterisk-video-request at lists.digium.com
You can reach the person managing the list at
asterisk-video-owner at lists.digium.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of asterisk-video digest..."
Today's Topics:
1. Re: video obd call |h324m gw (sudhir mor)
2. Re: video obd call |h324m gw (Sergio Garcia Murillo)
----------------------------------------------------------------------
Message: 1
Date: Thu, 24 Feb 2011 13:57:57 +0530 (IST)
From: sudhir mor <sudhir_mor2000 at yahoo.com>
Subject: Re: [Asterisk-video] video obd call |h324m gw
To: Development discussion of video media support in Asterisk
<asterisk-video at lists.digium.com>
Message-ID: <711770.75556.qm at web94816.mail.in2.yahoo.com>
Content-Type: text/plain; charset="utf-8"
Hi Pankaj,
Please follow help from this link
https://issues.asterisk.org/view.php?id=10189
?
Sudhir Mor
Senior Developer
Voicetap Technologies
Mobile : +91-9891318796
________________________________
________________________________
From: pankaj pandey <pankaj.niet at yahoo.com>
To: asterisk-video at lists.digium.com
Sent: Thu, 24 February, 2011 1:35:02 PM
Subject: [Asterisk-video] video obd call |h324m gw
Hi everyone,
?
My first scenario
3G phone -> asterisk(h324m gw)->sip
Is working fine.
?
when I try a video OBD from sip
i.e.
SIP -> asterisk(h324m gw)-> 3G phone
?
Video OBD call is originated at 3G phone end and it is shows as video call, but
when I picking the call it shows an ?Unknown Error? and call cut with ?hangup
request, cause 16..
?
below is the dial-plan and cli log.
?
?
please suggest the way forward...
?
?
?
[3G]
exten =>? _X.,1,h324m_call(${EXTEN}@3Gout)
?
[3Gout]
exten =>? _X.,1,Set(CHANNEL(transfercapability)=VIDEO)
exten =>? _X.,2,NoOp(transfer=${CHANNEL(transfercapability)})
exten =>? _X.,3,Set(CHANNEL(userinformationlayer1)=38)
exten =>? _X.,4,NoOp(ul1=${CHANNEL(userinformationlayer1)})
exten =>? _X.,n,Dial(ZAP/g1/${EXTEN})
?
?
- Executing [93xxxxxxxx at 3G:1] h324m_call("SIP/100-096dc4a0", "93xxxxxxxx at 3Gout")
in new stack
??? -- Executing [93xxxxxxxx at 3Gout:1] Set("Local/93xxxxxxxx at 3Gout-ad7c,2",
"CHANNEL(transfercapability)=VIDEO") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:2] NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2",
"transfer=VIDEO") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:3] Set("Local/93xxxxxxxx at 3Gout-ad7c,2",
"CHANNEL(userinformationlayer1)=38") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:4] NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2",
"ul1=38") in new stack
??? -- Executing [93xxxxxxxx at 3Gout:5] Dial("Local/93xxxxxxxx at 3Gout-ad7c,2",
"ZAP/g1/93xxxxxxxx") in new stack
??? -- digital call, setting user information layer 1 to 38 (0x26)
??? -- Requested transfer capability: 0x18 - VIDEO
??? -- Called g1/93xxxxxxxx
??? -- Zap/1-1 is proceeding passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
??? -- Zap/1-1 is making progress passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
??? -- Zap/1-1 is ringing
??? -- Zap/1-1 answered Local/93xxxxxxxx at 3Gout-ad7c,2
? == Spawn extension (3Gout, 93xxxxxxxx, 5) exited non-zero on
'Local/93xxxxxxxx at 3Gout-ad7c,2'
??? -- Channel 0/1, span 1 got hangup request, cause 16
??? -- Hungup 'Zap/1-1'
Thanks,
Pankaj
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-video/attachments/20110224/b6308506/attachment-0001.htm>
------------------------------
Message: 2
Date: Thu, 24 Feb 2011 09:47:00 +0100
From: Sergio Garcia Murillo <sergio.garcia at fontventa.com>
Subject: Re: [Asterisk-video] video obd call |h324m gw
To: Development discussion of video media support in Asterisk
<asterisk-video at lists.digium.com>
Message-ID: <4D661B04.3080300 at fontventa.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Enable debug on asterisk and attach log again
Best regards
Sergio
El 24/02/2011 9:05, pankaj pandey escribi?:
>
> Hi everyone,
>
> My first scenario
>
> 3G phone -> asterisk(h324m gw)->sip
>
> Is working fine.
>
> when I try a video OBD from sip
>
> i.e.
>
> SIP -> asterisk(h324m gw)-> 3G phone
>
> Video OBD call is originated at 3G phone end and it is shows as video
> call, but when I picking the call it shows an ?Unknown Error? and call
> cut with hangup request, cause 16..
>
> below is the dial-plan and cli log.
>
> please suggest the way forward...
>
> [3G]
>
> exten =>_X.,1,h324m_call(${EXTEN}@3Gout)
>
> [3Gout]
>
> exten =>_X.,1,Set(CHANNEL(transfercapability)=VIDEO)
>
> exten =>_X.,2,NoOp(transfer=${CHANNEL(transfercapability)})
>
> exten =>_X.,3,Set(CHANNEL(userinformationlayer1)=38)
>
> exten =>_X.,4,NoOp(ul1=${CHANNEL(userinformationlayer1)})
>
> exten =>_X.,n,Dial(ZAP/g1/${EXTEN})
>
> - Executing [93xxxxxxxx at 3G:1] h324m_call("SIP/100-096dc4a0",
> "93xxxxxxxx at 3Gout") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:1] Set("Local/93xxxxxxxx at 3Gout-ad7c,2",
> "CHANNEL(transfercapability)=VIDEO") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:2]
> NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2", "transfer=VIDEO") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:3] Set("Local/93xxxxxxxx at 3Gout-ad7c,2",
> "CHANNEL(userinformationlayer1)=38") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:4]
> NoOp("Local/93xxxxxxxx at 3Gout-ad7c,2", "ul1=38") in new stack
>
> -- Executing [93xxxxxxxx at 3Gout:5]
> Dial("Local/93xxxxxxxx at 3Gout-ad7c,2", "ZAP/g1/93xxxxxxxx") in new stack
>
> -- digital call, setting user information layer 1 to 38 (0x26)
>
> -- Requested transfer capability: 0x18 - VIDEO
>
> -- Called g1/93xxxxxxxx
>
> -- Zap/1-1 is proceeding passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
>
> -- Zap/1-1 is making progress passing it to Local/93xxxxxxxx at 3Gout-ad7c,2
>
> -- Zap/1-1 is ringing
>
> -- Zap/1-1 answered Local/93xxxxxxxx at 3Gout-ad7c,2
>
> == Spawn extension (3Gout, 93xxxxxxxx, 5) exited non-zero on
> 'Local/93xxxxxxxx at 3Gout-ad7c,2'
>
> -- Channel 0/1, span 1 got hangup request, cause 16
>
> -- Hungup 'Zap/1-1'
>
>
>
> Thanks,
> Pankaj
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-video/attachments/20110224/bb14a1fb/attachment.htm>
------------------------------
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-video
End of asterisk-video Digest, Vol 58, Issue 12
**********************************************
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-video
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-video
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-video/attachments/20110225/5405b9f8/attachment-0001.htm>
More information about the asterisk-video
mailing list