[Asterisk-video] Quest for working MCU software
Sergio Garcia Murillo
sergio.garcia at fontventa.com
Wed Dec 28 16:13:56 CST 2011
Another happy customer.. ;)
If you find any problem/feedback just post it here.
BR
Sergio
El 28/12/2011 21:45, ray klassen escribió:
> Ah. Now it works... Lots to play with.
>
>
>
>
>
> ----- Original Message -----
> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
> To: ray klassen<julius_ahenobarbus at yahoo.co.uk>
> Cc:
> Sent: Friday, 23 December 2011, 14:01
> Subject: Re: [Asterisk-video] Quest for working MCU software
>
> I see the problem:
>
> c=IN IP4
>
> It seems that you have not configured the media IP in the media mixer
> confing in the mcuWeb
>
> Best regards
> Sergio
>
> El 23/12/2011 21:28, ray klassen escribió:
>> here's a capture
>>
>> wireshark reports that packet 5 (200 Ok with session description) is malformed.
>>
>> 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb
>>
>>
>>
>>
>> ----- Original Message -----
>> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
>> To: Development discussion of video media support in Asterisk<asterisk-video at lists.digium.com>
>> Cc:
>> Sent: Tuesday, 20 December 2011, 16:22
>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>
>> Hi,
>>
>> Could you get an ethereal trace of the SIP negotiation? Usually that
>> happens when Asterisk/FreePBX does not receive the ACK.
>>
>> Best regards
>> Sergio
>>
>> El 16/12/2011 23:23, ray klassen escribió:
>>> Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops.
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
>>> To: asterisk-video at lists.digium.com
>>> Cc:
>>> Sent: Thursday, 15 December 2011, 17:57
>>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>>
>>> Hi,
>>>
>>> Check this:
>>>
>>> http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk
>>>
>>> I have just added the info to the web.
>>>
>>> BR
>>> Sergio
>>> El 15/12/2011 21:50, ray klassen escribió:
>>>> actually the question should be how does it interface with freepbx...?
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: ray klassen<julius_ahenobarbus at yahoo.co.uk>
>>>> To: Development discussion of video media support in Asterisk<asterisk-video at lists.digium.com>
>>>> Cc:
>>>> Sent: Thursday, 15 December 2011, 11:57
>>>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>>>
>>>>
>>>>
>>>> That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk?
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
>>>> To: Development discussion of video media support in Asterisk<asterisk-video at lists.digium.com>
>>>> Cc:
>>>> Sent: Wednesday, 14 December 2011, 10:03
>>>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>>>
>>>> Hi Ray,
>>>>
>>>> I will check this errors and get back to you, I usually use Netbeans
>>>> directly for compiling the mcuWeb application. In the mean time you can
>>>> try with a binary build of the application (they are very well updated),
>>>> try this one:
>>>>
>>>> http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download
>>>>
>>>> Best regards
>>>> Sergio
>>>>
>>>> El 14/12/2011 18:08, ray klassen escribió:
>>>>> The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe...
>>>>>
>>>>>
>>>>> Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track
>>>>>
>>>>> some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit
>>>>>
>>>>> shows up outside the should-be convenient code box. -a bit misleading but whatever.
>>>>>
>>>>>
>>>>> also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well.
>>>>>
>>>>> I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist. But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list.
>>>>>
>>>>>
>>>>> Install Log:
>>>>>
>>>>> - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server
>>>>> - edit /etc/apt/sources.list to include contrib and non-free
>>>>> - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2
>>>>> - download sailfin-installer-v2-b31g-linux.jar
>>>>> - install sailfin in /usr/local/sailfin per instructions @ http://sailfin.java.net/downloads/v1-MS4.html -- successful
>>>>>
>>>>>
>>>>> - start mcuWeb install per instructions @ http://www.medooze.com/products/mcu/open-source-installation.aspx
>>>>>
>>>>> - download apache-xmlrpc-3.1.3-bin.tar.bz2 and untar into /usr/local/apache-xmlrpc-3.1.3
>>>>> - cd /usr/local/src
>>>>>
>>>>> - svn checkout https://mcumediaserver.svn.sourceforge.net/svnroot/mcumediaserver mcu
>>>>> - edit /usr/local/src/mcu/XmlRpcMcuClient/nbproject/project.properties:
>>>>> - unmentioned file.reference to apache-xmlrpc-3.1.3-src - download,install that to /usr/local/src
>>>>> - unmentioned file.reference to ../../usr/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar
>>>>>
>>>>> -- download from www.findpro.net/en/index.php?action=download&id=949335
>>>>> - unmentioned file.reference to xmlrpc-server-3.1.3.jar -- edited to match existing file
>>>>>
>>>>>
>>>>> - re-check all file paths for validity (there is a file there!)
>>>>>
>>>>>
>>>>> file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/commons-logging-1.1.jar
>>>>> file.reference.src-main=/usr/local/src/apache-xmlrpc-3.1.3-src/client/src/main/
>>>>> file.reference.ws-commons-util-1.0.1.jar=/usr/local/lib/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar
>>>>> file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/ws-commons-util-1.0.2.jar
>>>>> file.reference.xmlrpc-client-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-client-3.1.3.jar
>>>>> file.reference.xmlrpc-common-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-common-3.1.3.jar
>>>>> file.reference.xmlrpc-server-3.1.3.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-server-3.1.3.jar
>>>>>
>>>>>
>>>>> - edit /usr/local/src/mcu/mcuWeb/nbproject/project.properties:
>>>>> - unmentioned file.reference to jsdp-1.0.jar download install from sourceforge
>>>>>
>>>>>
>>>>>
>>>>> file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xml-3.1.3/lib/commons-logging-1.1.jar
>>>>> file.reference.jsdp-1.0.jar=/usr/local/lib/jsdp-1.0/jsdp-1.0.jar
>>>>> file.reference.ssa-api.jar=/usr/local/sailfin/lib/ssa-api.jar
>>>>> file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xml-3.1.3/lib/ws-commons-util-1.0.2.jar
>>>>> file.reference.xmlrpc-client-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-client-3.1.3.jar
>>>>> file.reference.xmlrpc-common-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-common-3.1.3.jar
>>>>> file.reference.XmlRpcMcuClient.jar=../XmlRpcMcuClient/dist/XmlRpcMcuClient.jar
>>>>>
>>>>>
>>>>> - re-check all file paths for validity (there is, or will be, a file there!)
>>>>>
>>>>>
>>>>> - cd /usr/local/src/mcu/XmlRpcClient
>>>>>
>>>>> - ant
>>>>>
>>>>> - returns error /usr/local/src/mcu/XmlRpcMcuClient/src/org/murillo/MediaServer/XmlRPCJSR309Client.java:11: package org.apache.xmlrpc does not exist
>>>>>
>>>>>
>>>>>
>>>>> ----- Original Message -----
>>>>> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
>>>>> To: asterisk-video at lists.digium.com
>>>>> Cc:
>>>>> Sent: Tuesday, 13 December 2011, 10:00
>>>>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>>>>
>>>>> Hi,
>>>>>
>>>>> have you tried to ask for help in any of those projects? ;)
>>>>>
>>>>> What issues have you found with mcuWeb, maybe I could help you setting
>>>>> it up.
>>>>>
>>>>> Best regards
>>>>> Sergio
>>>>>
>>>>> El 13/12/2011 18:03, ray klassen escribió:
>>>>>> What are people using for open source MCU's? I've tried vmukti, but it gives me a 'trust not granted' error. I've tried mcuWeb but it produces some java exception. I've tried openvcs, which has allowed me to connect to it but gives me an error I can't find on the web from the grandstream video phone I use for testing...
>>>>>>
>>>>>> --
>>>>>> _____________________________________________________________________
>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>>
>>>>>> asterisk-video mailing list
>>>>>> To UNSUBSCRIBE or update options visit:
>>>>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-video mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-video mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-video mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-video mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-video mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-video mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-video mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-video mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-video
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
More information about the asterisk-video
mailing list