[Asterisk-video] Quest for working MCU software

ray klassen julius_ahenobarbus at yahoo.co.uk
Wed Dec 28 14:45:11 CST 2011 

Ah. Now it works... Lots to play with.





----- Original Message -----
From: Sergio Garcia Murillo <sergio.garcia at fontventa.com>
To: ray klassen <julius_ahenobarbus at yahoo.co.uk>
Cc: 
Sent: Friday, 23 December 2011, 14:01
Subject: Re: [Asterisk-video] Quest for working MCU software

I see the problem:

c=IN IP4

It seems that you have not configured the media IP in the media mixer 
confing in the mcuWeb

Best regards
Sergio

El 23/12/2011 21:28, ray klassen escribió:
> here's a capture
>
> wireshark reports that packet 5 (200 Ok with session description) is malformed.
>
> 172.19.1.47 is my pbx, 172.19.1.49 is mcuWeb
>
>
>
>
> ----- Original Message -----
> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
> To: Development discussion of video media support in Asterisk<asterisk-video at lists.digium.com>
> Cc:
> Sent: Tuesday, 20 December 2011, 16:22
> Subject: Re: [Asterisk-video] Quest for working MCU software
>
> Hi,
>
> Could you get  an ethereal trace of the SIP negotiation? Usually that
> happens when Asterisk/FreePBX does not receive the ACK.
>
> Best regards
> Sergio
>
> El 16/12/2011 23:23, ray klassen escribió:
>> Ok I plugged the new info into a trunk on my freepbx install and I set up an outgoing route to it, then I set up a conference on mcuWeb that matches the outgoing did on the route and I get some joy on the mcuWeb console (it registers my incoming userid) but the connection just drops.
>>
>>
>>
>> ----- Original Message -----
>> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
>> To: asterisk-video at lists.digium.com
>> Cc:
>> Sent: Thursday, 15 December 2011, 17:57
>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>
>> Hi,
>>
>> Check this:
>>
>> http://www.medooze.com/products/mcu/open-source-installation.aspx#asterisk
>>
>> I have just added the info to the web.
>>
>> BR
>> Sergio
>> El 15/12/2011 21:50, ray klassen escribió:
>>> actually the question should be how does it interface with freepbx...?
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: ray klassen<julius_ahenobarbus at yahoo.co.uk>
>>> To: Development discussion of video media support in Asterisk<asterisk-video at lists.digium.com>
>>> Cc:
>>> Sent: Thursday, 15 December 2011, 11:57
>>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>>
>>>
>>>
>>> That worked ok. I Followed the media-server instructions it compiled safely and it's running and added to mcuWeb console. Now how does this interface with asterisk?
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
>>> To: Development discussion of video media support in Asterisk<asterisk-video at lists.digium.com>
>>> Cc:
>>> Sent: Wednesday, 14 December 2011, 10:03
>>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>>
>>> Hi Ray,
>>>
>>> I will check this errors and get back to you, I usually use Netbeans
>>> directly for compiling the mcuWeb application. In the mean time you can
>>> try with a binary build of the application (they are very well updated),
>>> try this one:
>>>
>>> http://sourceforge.net/projects/mcumediaserver/files/mcumediaserver/rev%20414/mcuWeb.sar/download
>>>
>>> Best regards
>>> Sergio
>>>
>>> El 14/12/2011 18:08, ray klassen escribió:
>>>> The reason i went for the .vmdk fie was that I couldn't get the svn version compiled. But with your help maybe...
>>>>
>>>>
>>>> Ok I'm setting this all out in painstaking detail, because I don't know where I could be off track
>>>>
>>>> some of the formatting on http://www.medooze.com/products/mcu/open-source-installation.aspx has masked some steps in the file edits because the first edit
>>>>
>>>> shows up outside the should-be convenient code box. -a bit misleading but whatever.
>>>>
>>>>
>>>> also some of the file.properties lines point to stuff the howto doesn't mention. Because the first time I tried this, it error-ed out, I have downloaded and installed those as well.
>>>>
>>>> I'm stuck on running ant in the XmlRpcMcuClient directory -- error reports package org.apache.xmlrpc does not exist.  But how could that be? Looks like a real noob error. But I've got all the paths I know of right. So here I go posting to the list.
>>>>
>>>>
>>>> Install Log:
>>>>
>>>> - Vanilla Debian Squeeze amd64 install no extra packages, just ssh-server
>>>> - edit /etc/apt/sources.list to include contrib and non-free
>>>> - apt-get install sun-java6-jdk sun-java6-jre sun-java6-fonts sun-java6-javadb sun-java6-bin ant subversion bzip2
>>>> - download sailfin-installer-v2-b31g-linux.jar
>>>> - install sailfin in /usr/local/sailfin per instructions @ http://sailfin.java.net/downloads/v1-MS4.html -- successful
>>>>
>>>>
>>>> - start mcuWeb install per instructions @ http://www.medooze.com/products/mcu/open-source-installation.aspx
>>>>
>>>> - download apache-xmlrpc-3.1.3-bin.tar.bz2 and untar into /usr/local/apache-xmlrpc-3.1.3
>>>> - cd /usr/local/src
>>>>
>>>> - svn checkout https://mcumediaserver.svn.sourceforge.net/svnroot/mcumediaserver mcu
>>>> - edit  /usr/local/src/mcu/XmlRpcMcuClient/nbproject/project.properties:
>>>>           - unmentioned file.reference to apache-xmlrpc-3.1.3-src - download,install that to /usr/local/src
>>>>           - unmentioned file.reference to ../../usr/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar
>>>>
>>>>                -- download from www.findpro.net/en/index.php?action=download&id=949335
>>>>           - unmentioned file.reference to xmlrpc-server-3.1.3.jar -- edited to match existing file
>>>>
>>>>
>>>>          - re-check all file paths for validity (there is a file there!)
>>>>
>>>>
>>>> file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/commons-logging-1.1.jar
>>>> file.reference.src-main=/usr/local/src/apache-xmlrpc-3.1.3-src/client/src/main/
>>>> file.reference.ws-commons-util-1.0.1.jar=/usr/local/lib/xmlrpc-3.0rc1/lib/ws-commons-util-1.0.1.jar
>>>> file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/ws-commons-util-1.0.2.jar
>>>> file.reference.xmlrpc-client-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-client-3.1.3.jar
>>>> file.reference.xmlrpc-common-3.1.3.jar==/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-common-3.1.3.jar
>>>> file.reference.xmlrpc-server-3.1.3.jar=/usr/local/lib/apache-xmlrpc-3.1.3/lib/xmlrpc-server-3.1.3.jar
>>>>
>>>>
>>>> - edit  /usr/local/src/mcu/mcuWeb/nbproject/project.properties:
>>>>           - unmentioned file.reference to jsdp-1.0.jar download install from sourceforge
>>>>
>>>>    
>>>>
>>>> file.reference.commons-logging-1.1.jar=/usr/local/lib/apache-xml-3.1.3/lib/commons-logging-1.1.jar
>>>> file.reference.jsdp-1.0.jar=/usr/local/lib/jsdp-1.0/jsdp-1.0.jar
>>>> file.reference.ssa-api.jar=/usr/local/sailfin/lib/ssa-api.jar
>>>> file.reference.ws-commons-util-1.0.2.jar=/usr/local/lib/apache-xml-3.1.3/lib/ws-commons-util-1.0.2.jar
>>>> file.reference.xmlrpc-client-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-client-3.1.3.jar
>>>> file.reference.xmlrpc-common-3.1.3.jar=/usr/local/lib/apache-xml-3.1.3/lib/xmlrpc-common-3.1.3.jar
>>>> file.reference.XmlRpcMcuClient.jar=../XmlRpcMcuClient/dist/XmlRpcMcuClient.jar
>>>>
>>>>
>>>>         - re-check all file paths for validity (there is, or will be, a file there!)
>>>>
>>>>
>>>>         - cd /usr/local/src/mcu/XmlRpcClient
>>>>
>>>>         - ant
>>>>
>>>>            - returns error /usr/local/src/mcu/XmlRpcMcuClient/src/org/murillo/MediaServer/XmlRPCJSR309Client.java:11: package org.apache.xmlrpc does not exist
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: Sergio Garcia Murillo<sergio.garcia at fontventa.com>
>>>> To: asterisk-video at lists.digium.com
>>>> Cc:
>>>> Sent: Tuesday, 13 December 2011, 10:00
>>>> Subject: Re: [Asterisk-video] Quest for working MCU software
>>>>
>>>> Hi,
>>>>
>>>> have you tried to ask for help in any of those projects? ;)
>>>>
>>>> What issues have you found with mcuWeb, maybe I could help you setting
>>>> it up.
>>>>
>>>> Best regards
>>>> Sergio
>>>>
>>>> El 13/12/2011 18:03, ray klassen escribió:
>>>>> What are people using for open source MCU's? I've tried vmukti, but it gives me a 'trust not granted' error. I've tried mcuWeb but it produces some java exception. I've tried openvcs, which has allowed me to connect to it but gives me an error I can't find on the web from the grandstream video phone I use for testing...
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-video mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>            http://lists.digium.com/mailman/listinfo/asterisk-video
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-video mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>          http://lists.digium.com/mailman/listinfo/asterisk-video
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-video mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>          http://lists.digium.com/mailman/listinfo/asterisk-video
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-video mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-video
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-video mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>        http://lists.digium.com/mailman/listinfo/asterisk-video
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-video mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>        http://lists.digium.com/mailman/listinfo/asterisk-video
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-video mailing list
>> To UNSUBSCRIBE or update options visit:
>>      http://lists.digium.com/mailman/listinfo/asterisk-video
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-video mailing list
>> To UNSUBSCRIBE or update options visit:
>>      http://lists.digium.com/mailman/listinfo/asterisk-video
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-video

More information about the asterisk-video mailing list