[Asterisk-video] Simulate a 3G-324M video call

[borja.sixto at i6net.com]

I6net do it too.
We are able to pass the h324m call by voip too, without using E1 hardware. Intersting with vm and cloud servers...

Regards.


Borja

Sent from my android device.

-----Original Message-----
From: Dan Julius <dan.julius at gmail.com>
To: Development discussion of video media support in Asterisk <asterisk-video at lists.digium.com>
Sent: mer., 13 oct. 2010 10:20 AM
Subject: Re: [Asterisk-video] Simulate a 3G-324M video call

I have successfully tested making 3G calls from one server to another.
The difference in my setup was that the servers were located at different
sites, and the call was made over the Telco lines.

Nevertheless, if the devices are configured correctly to communicate of the
E1 (audio calls work), then I think it will work .

Dan


On Wed, Oct 13, 2010 at 9:47 AM, huu giang <huugiang104 at yahoo.com> wrote:

> Hi all,
>
> I want to simulate a 3G-324M video call  and want to do as the following
> way:
>
> I plan to use 2 servers, each sever will be installed Asterisk and a Digium
> or Sangoma card on its board. And then 2 servers wiil be connected to each
> other through an E1 line.
>
> I wiil use a Sip Phone (for examle Xlite or Kapanga), configure it to use
> 3G-324M codec and make a video call to Asterisk installed on the first
> server, can Asterisk forward the video call to the secondary server through
> E1 line, so the Asterisk on the second server will recevie the call as a
> 3G-324M video call ?
>
> Is it possible ?. Anyone do it ?
>
> Many thanks,
> Giang.
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-video
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20101013/99d9d1bb/attachment.htm