[Asterisk-video] 3G Video Call PRI Debug Output

sudhir mor sudhir_mor2000 at yahoo.com
Sun Nov 28 23:01:38 CST 2010


Hi Mitul,

Please check for mp4 application properly installed and configured. One more 
possiblity can be the codecs which according to logs is not a problem but still 
ui suggest you to check.
 
Thanks & Regds
Sudhir Mor
Senior Developer
Voicetap Technologies
Mobile : +91-9891318796 
________________________________





________________________________
From: Mitul Limbani <mitul at enterux.com>
To: asterisk-video at lists.digium.com
Sent: Sat, 27 November, 2010 5:45:44 PM
Subject: [Asterisk-video] 3G Video Call PRI Debug Output

Hello,

I have successfully installed app_h324m and app_mp4 and loaded on the  
Asterisk Box.

Now when I get the video call on, I get the following problems:

My dialplan says this:

[from-pstn]
exten => _7642,1,H324m_gw(dabang at 3gp_videos)

[3gp_videos]

exten => dabang,1,H324m_gw_answer()
exten => dabang,n,mp4play(/tmp/dabang.3gp)
exten => dabang,n,Hangup()

But when I accept the call on the circuit, dialplan doesnt move any  
further then H324m_gw_answer() and on the remote end on the 3G Video  
Call Mobile phone i can see waiting for remote video :(

Which means that the next step in dialplan of mp4play is not getting  
executed, coz the H324m_gw_answer negotiations aint happening.

Here is the output of 'pri debug span 1'

--------------------------------------------------------------------------------
Received message for call 0x8cc6c50 on 0xb5d26f08 TEI/SAPI 0/0,  
call->pri is 0xb5d26f08 TEI/SAPI 0/0
-- Processing IE 8 (cs0, Cause)
q931.c:7197 post_handle_q931_message: Call 307 enters state 0 (Null).  
Hold state: Idle
q931_hangup: other hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null,  
hold-state Idle
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null,  
hold-state Idle

< Protocol Discriminator: Q.931 (8)  len=37
< TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent from originator)
< Message Type: SETUP (5)
< [04 03 88 90 a6]
< Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer  
capability: Unrestricted digital information (8)
<                              Ext: 1  Trans mode/rate: 64kbps,  
circuit-mode (16)
<                                User information layer 1: H.223/H.245  
Multimedia (38)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  
Exclusive  Dchan: 0
<                      ChanSel: As indicated in following octets
<                      Ext: 1  Coding: 0  Number Specified  Channel Type: 3
<                      Ext: 1  Channel: 1 Type: CPE]
< [6c 0c 21 83 39 38 36 39 32 33 30 35 39 30]
< Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI:  
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
<                          Presentation: Presentation allowed of  
network provided number (3)  'XXXXXXXXXX' ]
< [70 05 c1 37 36 34 32]
< Called Number (len= 7) [ Ext: 1  TON: Subscriber Number (4)  NPI:  
ISDN/Telephony Numbering Plan (E.164/E.163) (1)  '7642' ]
< [a1]
< Sending Complete (len= 1)
-- Making new call for cref 308
Received message for call 0x8c8a210 on 0xb5d26f08 TEI/SAPI 0/0,  
call->pri is 0xb5d26f08 TEI/SAPI 0/0
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
-- Processing IE 161 (cs0, Sending Complete)
q931.c:6966 post_handle_q931_message: Call 308 enters state 6 (Call  
Present).  Hold state: Idle
q931.c:4594 q931_call_proceeding: Call 308 enters state 9 (Incoming  
Call Proceeding).  Hold state: Idle

> DL-DATA request
> Protocol Discriminator: Q.931 (8)  len=10
> TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent to originator)
> Message Type: CALL PROCEEDING (2)
TEI=0 Transmitting N(S)=47, window is open V(A)=47 K=7

> Protocol Discriminator: Q.931 (8)  len=10
> TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent to originator)
> Message Type: CALL PROCEEDING (2)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  
> Exclusive  Dchan: 0
>                      ChanSel: As indicated in following octets
>                      Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                      Ext: 1  Channel: 1 Type: CPE]
    -- Accepting call from 'XXXXXXXXXXXX' to '7642' on channel 0/1, span 1
    -- Executing [7642 at from-pstn:1] h324m_gw("DAHDI/1-1",  
"dabang at 3gp_videos") in new stack
    -- Executing [dabang at 3gp_videos:1]  
h324m_gw_answer("Local/dabang at 3gp_videos-b658,2", "") in new stack
q931.c:4760 q931_connect: Call 308 enters state 8 (Connect Request).  
Hold state: Idle

> DL-DATA request
> Protocol Discriminator: Q.931 (8)  len=10
> TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent to originator)
> Message Type: CONNECT (7)
TEI=0 Transmitting N(S)=48, window is open V(A)=47 K=7

> Protocol Discriminator: Q.931 (8)  len=10
> TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent to originator)
> Message Type: CONNECT (7)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit  Other(PRI)  Spare: 0  
> Exclusive  Dchan: 0
>                      ChanSel: As indicated in following octets
>                      Ext: 1  Coding: 0  Number Specified  Channel Type: 3
>                      Ext: 1  Channel: 1 Type: CPE]
TEI=0 Retransmitting frame N(S)=47 now!
TEI=0 Retransmitting frame N(S)=48 now!

< Protocol Discriminator: Q.931 (8)  len=5
< TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent from originator)
< Message Type: CONNECT ACKNOWLEDGE (15)
Received message for call 0x8c8a210 on 0xb5d26f08 TEI/SAPI 0/0,  
call->pri is 0xb5d26f08 TEI/SAPI 0/0
q931.c:7130 post_handle_q931_message: Call 308 enters state 10  
(Active).  Hold state: Idle

< Protocol Discriminator: Q.931 (8)  len=13
< TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent from originator)
< Message Type: DISCONNECT (69)
< [08 02 80 90]
< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  
Location: User (0)
<                  Ext: 1  Cause: Normal Clearing (16), class = Normal  
Event (1) ]
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard  
(0)  0: 0  Location: Public network serving the local user (2)
<                              Ext: 1  Progress Description: Inband  
information or appropriate pattern now available. (8) ]
Received message for call 0x8c8a210 on 0xb5d26f08 TEI/SAPI 0/0,  
call->pri is 0xb5d26f08 TEI/SAPI 0/0
-- Processing IE 8 (cs0, Cause)
-- Processing IE 30 (cs0, Progress Indicator)
-- Found active call: 0x8c8a210 cref:308
q931.c:7315 post_handle_q931_message: Call 308 enters state 12  
(Disconnect Indication).  Hold state: Idle
    -- Channel 0/1, span 1 got hangup request, cause 16
  == Spawn extension (3gp_videos, dabang, 1) exited non-zero on  
'Local/dabang at 3gp_videos-b658,2'
  == Spawn extension (from-pstn, 7642, 1) exited non-zero on 'DAHDI/1-1'
q931_hangup: other hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,  
peerstate Disconnect Request, hold-state Idle
q931.c:4798 q931_release: Call 308 enters state 19 (Release Request).  
Hold state: Idle

> DL-DATA request
> Protocol Discriminator: Q.931 (8)  len=9
> TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent to originator)
> Message Type: RELEASE (77)
TEI=0 Transmitting N(S)=49, window is open V(A)=49 K=7

> Protocol Discriminator: Q.931 (8)  len=9
> TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent to originator)
> Message Type: RELEASE (77)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  
> Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal  
> Event (1) ]
    -- Hungup 'DAHDI/1-1'
TEI=0 Sending REJ N(R)=52
TEI=0 Retransmitting frame N(S)=49 now!

< Protocol Discriminator: Q.931 (8)  len=9
< TEI=0 Call Ref: len= 2 (reference 308/0x134) (Sent from originator)
< Message Type: RELEASE COMPLETE (90)
< [08 02 81 90]
< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  Spare: 0  
Location: Private network serving the local user (1)
<                  Ext: 1  Cause: Normal Clearing (16), class = Normal  
Event (1) ]
Received message for call 0x8c8a210 on 0xb5d26f08 TEI/SAPI 0/0,  
call->pri is 0xb5d26f08 TEI/SAPI 0/0
-- Processing IE 8 (cs0, Cause)
q931.c:7197 post_handle_q931_message: Call 308 enters state 0 (Null).  
Hold state: Idle
q931_hangup: other hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null,  
hold-state Idle
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null,  
hold-state Idle
--------------------------------------------------------------------------------

Can any one suggest what could be the potential problem ?

Regards,
Mitul Limbani,
Enterux Solutions,
www.enterux.com


-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-video mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-video


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20101129/04480d58/attachment.htm 


More information about the asterisk-video mailing list