[Asterisk-video] how to configure app_conference

[Roger Gomez Olivares]

The first time I try to install the app_conference produce a lot of error too, but with some change in the paths of the  Makefile, I install normaly.


----- Mensaje original ----
De: Mihai Balea <mihai at hates.ms>
Para: Development discussion of video media support in Asterisk <asterisk-video at lists.digium.com>
Enviado: lunes, 12 de mayo, 2008 16:13:12
Asunto: Re: [Asterisk-video] how to configure app_conference


On May 12, 2008, at 12:17 PM, b_agung at elect-eng.its.ac.id wrote:

> hy all
>
> how to configure app_conference??
> i follow the instruction on voip-info.org but the process still  
> produce a
> lot of error.

You might want to start by reading the README file, followed by  
CLI.txt and Dialplan.txt.  These files are packaged with appconference  
source.
Make sure you are using a supported codec.  Make sure you're using  
Asterisk 1.4.x.

Appconference is not hard to set up if you take a few minutes and do  
your research.

If you are still not able to get it to work, you can ping the  
appconference developer list on sourceforge.net

Mihai


      ______________________________________________ 
Enviado desde Correo Yahoo! La bandeja de entrada más inteligente.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-video/attachments/20080514/e97894d3/attachment.htm