[Asterisk-video] no need chan_ss7, trying sip->3g

[barbara_b02 at libero.it]

Hi!!!
Ok, I don't need the patch for chan_ss7 because my goal is to do 3G<->SIP videocalling (without PSTN)...

I've changed my extensions.conf setting the variable first and then dialing, but it doesn't work: the mobile phone doesn't ring and the call fails.

3G->SIP (videocall ok):
*CLI> core show channels
Channel              Location             State   Application(Data)             
mISDN/1-u28          dialcell at sip_to_cell Up      (None)                        
SIP/101-081dd8c8     03934714462 at default: Up      h324m_call(dialcell at sip_to_cel
2 active channels
1 active call

SIP->3G:
*CLI> core show channels
Channel              Location             State   Application(Data)             
SIP/101-08244640     03934714462 at default: Ring    (None)                        
1 active channel
1 active call

It means Asterisk doesn't forward the call, right?

Maybe I forget something in misdn.conf?

This is the CLI (misdn.conf debug=3):
*CLI> P[ 0]  --> * NEW CHANNEL dad:03934714462 oad:(null)
P[ 1] read_config: Getting Config
P[ 1]  --> TON: Unknown
P[ 1]  --> LTON: Unknown
P[ 1]  --> CTON: Unknown
P[ 1] * CALL: 1/03934714462
P[ 1]  --> * dad:dialcell tech:mISDN/0-u4 ctx:default
P[ 1]  --> * adding2newbc ext dialcell
P[ 1]  --> * adding2newbc callerid 101
P[ 1]  --> pres: -1 screen: -1
P[ 1]  --> pres: 0
P[ 1]  --> PRES: Allowed (0x0)
P[ 1]  --> SCREEN: Unscreened (0x0)
P[ 1] NO OPTS GIVEN
P[ 1] I SEND:SETUP oad:101 dad:03934714462 pid:6
P[ 1]  --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Unknown Bearer pi:0 keypad: sending_complete:0
P[ 1] --> new_l3id 30005
P[ 1]  --> * SEND: State Dialing pid:6
P[ 1] * IND : HANGUP    pid:6 ctx:default dad:03934714462 oad:dialcell State:CALLING
P[ 1]  --> l3id:30005
P[ 1]  --> cause:16
P[ 1]  --> out_cause:16
P[ 1]  --> state:CALLING
[Mar 13 12:02:23] NOTICE[26783]: chan_misdn.c:2523 misdn_hangup: release channel, in CALLING/INCOMING_SETUP state.. no other events happened
P[ 1] I SEND:RELEASE_COMPLETE oad:101 dad:03934714462 pid:6
P[ 1]  --> channel:255 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Unknown Bearer pi:0 keypad: sending_complete:0
P[ 1] $$$ CLEANUP CALLED pid:6
P[ 1] empty_chan_in_stack: cannot empty channel 255
P[ 1] CC_RELEASE_COMPLETE|CONFIRM [TE] 
P[ 1] I IND :RELEASE_COMPLETE oad: dad: pid:6 state:none
P[ 1]  --> channel:0 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> no Ch, so we've already released.
P[ 0] Cannot hangup chan, no ch
P[ 1] release_chan: Ch not found!
P[ 1] $$$ CLEANUP CALLED pid:6
P[ 1] $$$ CLEANUP CALLED pid:6
P[ 1]  --> Channel: mISDN/0-u4 hanguped new state:CLEANING
P[ 0] MGMT: SSTATUS: L1_ACTIVATED 
P[ 1] MGMT: SSTATUS: L2_ESTABLISH 
P[ 1] $$$ CLEANUP CALLED pid:0
[Mar 13 12:02:33] WARNING[26782]: pbx.c:2525 __ast_pbx_run: Timeout, but no rule 't' in context 'default'
P[ 1] MGMT: SSTATUS: L2_RELEASED

Thank you very much!
Regards
   Barbara