[asterisk-users] asterisk pjsip as voip client with multiple registrations

Joshua Colp jcolp at digium.com
Tue Sep 26 15:33:09 CDT 2017


On Tue, Sep 26, 2017, at 05:29 PM, marek cervenka wrote:
> hi,
> 
> i want use asterisk+pjsip as voip client with multiple registrations 
> (perf testing)
> 
> i'm using this example configuration for one account
> 
> [308]
> type=registration
> outbound_auth=308
> server_uri=sip:308 at example.com:5060
> client_uri=sip:308 at example.com:5060
> 
> [308](auth-userpass)
> username=308
> password=pass
> 
> [308](aor-single-reg)
> contact=sip:example.com:5060
> 
> [308](endpoint-basic)
> outbound_auth=308
> aors=308
> 
> [308]
> type=identify
> endpoint=308
> match=example.com
> 
> 
> my problem is contact on the other side (is same for all endpoints)
> 
> Addr->IP     : 1.1.1.1:5060
> Reg. Contact : sip:s at 1.1.1.1:5060
> 
> all incoming calls from PBX to my Asterisk are routed to only one 
> account  (because of same ip address/port ?)
> 
> how can i specify different source port or different contact address for 
> asterisk pjsip client with registration?

The "contact_user" option configures the user portion of the Contact
that is sent in the REGISTER. You can set it to a different value for
each registration.

-- 
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org



More information about the asterisk-users mailing list