[asterisk-users] Blocking outgping caller id on a PRI E1

[Neil Youngman]

I am trying to block/hide outgoing caller id on a PRI E1.

It seems that it should be fairly simple, but it is defeating me.

https://wiki.asterisk.org/wiki/display/AST/Function_CALLERID says:
"to hide your caller id, use: Set(CALLERID(num-pres)=prohib)"

That doesn't seem to do it.

The calls are originated from AMI and I have tried a blank "CallerId:" line and "CallerId: <>"". Neither of those made any difference.

I have also tried "hidecallerid=yes" in chan_dahdi.conf, but that has also made no difference.

I assume that I am missing something obvious?

Neil Youngman


Neil Youngman
Developer
Wirefast Limited

Wirefast provides secure corporate messaging services.
See our messaging solutions at  http://www.wirefast.com/
Please consider the environment.
Does this email or attachment need to be printed?
This message contains confidential information and is intended only
for the individual named. If you are not the named addressee you
should not disseminate, distribute or copy this email. Please
notify the sender immediately by email if you have received this
email by mistake and delete this email from your system.

Any views or opinions are solely those of the author
and do not necessarily represent those of Wirefast Limited

Email transmission cannot be guaranteed to be secure or error-free
as information could be intercepted, corrupted, lost, destroyed,
arrive late or incomplete, or contain viruses. The sender therefore
does not accept liability for any errors or omissions in the contents
of this message which arise as a result of email transmission.
Wirefast Limited is registered in England & Wales
Company number: 03865860
Registered Office: 7/10 Chandos Street, Cavendish Square, London, W1G 9DQ

Wirefast definitions of classification can be found here: www.wirefast.com/classifications