[asterisk-users] asterisk-users Digest, Vol 138, Issue 19

Mon Jan 25 12:37:49 CST 2016

I am working on asterisk ivr .i am facing problrm in crontab.when i run example it give bash 5:command not found then i check and found that no crontab for root user kindly guide me please 

Sent from my Samsung Galaxy smartphone.

-------- Original message --------
From: asterisk-users-request at lists.digium.com 
Date:25/01/2016  11:00 PM  (GMT+05:00) 
To: asterisk-users at lists.digium.com 
Cc:  
Subject: asterisk-users Digest, Vol 138, Issue 19 

Send asterisk-users mailing list submissions to
	asterisk-users at lists.digium.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.digium.com/mailman/listinfo/asterisk-users
or, via email, send a message with subject or body 'help' to
	asterisk-users-request at lists.digium.com

You can reach the person managing the list at
	asterisk-users-owner at lists.digium.com

When replying, please edit your Subject line so it is more specific
than "Re: Contents of asterisk-users digest..."

Today's Topics:

   1. Re: ST2030 replacement (Sil)
   2. Re: ST2030 replacement (Sil)
   3. Re: ST2030 replacement (Sil)
   4. t.38 fax over IAX2? (Benoit Panizzon)
   5. Re: set framing on dynamic interface DAHDI (Vinicius Fontes)
   6. Re: t.38 fax over IAX2? (Doug Lytle)
   7. Asterisk 13.7.0 failed to start - PJSIP 2.4.5
      (Administrator TOOTAI)

----------------------------------------------------------------------

Message: 1
Date: Mon, 25 Jan 2016 09:52:21 +0100
From: Sil <smog1 at free.fr>
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] ST2030 replacement
Message-ID: <56A5E245.908 at free.fr>
Content-Type: text/plain; charset=windows-1252; format=flowed

Le 08/01/2016 00:00, Frank a ?crit :
> Yealink T26P 
This model is too expansive for me.
Thanks
Sil

------------------------------

Message: 2
Date: Mon, 25 Jan 2016 09:52:19 +0100
From: Sil <smog1 at free.fr>
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] ST2030 replacement
Message-ID: <56A5E243.2020608 at free.fr>
Content-Type: text/plain; charset=windows-1252; format=flowed

Le 08/01/2016 08:46, Markos Vakondios a ?crit :
> Grandstream GXP-1628
Are keys of good quality ?
Thanks
Sil

------------------------------

Message: 3
Date: Mon, 25 Jan 2016 09:52:23 +0100
From: Sil <smog1 at free.fr>
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] ST2030 replacement
Message-ID: <56A5E247.4080709 at free.fr>
Content-Type: text/plain; charset=windows-1252; format=flowed

Le 08/01/2016 09:18, Glenn Geller (VDOPh) a ?crit :
> Also try vtech vsp725
>
> Thanks,
>
> *Glenn*
It seems that in France, it's this model that is distributed: "Alcatel 
Temporis IP300". It looks the same.
This model particularly interests me.
Thanks
Sil

------------------------------

Message: 4
Date: Mon, 25 Jan 2016 10:44:03 +0100
From: Benoit Panizzon <benoit.panizzon at imp.ch>
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] t.38 fax over IAX2?
Message-ID: <20160125104403.27a44947 at go.imp.ch>
Content-Type: text/plain; charset=UTF-8

Hello

Let's assume we have this situation:

Call => SIP TSP => Asterisk1 => IAX2 => Asterisk2 => SIP/ATA => Fax

I have two Asterisk Servers in two branch offices, which are
interconnected by IAX2 and the Switch functionality.

Asterisk1 is connected to the public phone network via a SIP provider
which supports T.38

A fax is connected to a SIP T.38 capable ATA Box.

If that fax is connected to Asterisk1, then the call is transparently
routed and received by this ATA box in T.38 mode.

If the fax is connectd to Asterisk2, then there is a IAX Link between
the originating SIP T.38 Fax and the Destination which is also T.38
capable. But T.38 is refused by Asterisk1. Fax receptions falls back to
g711 (sometimes) and is unreliable behind Asterisk2.

Google hints to me, that T.38 fax reception over IAX2 is possible with
IAXMODEM. So I suppose udptl t.38 should also transparently be passed
between SIP and IAX2. But I find no way to configure t38 on a IAX2
channel.

Am I missing something?

-Beno?t Panizzon-
-- 
I m p r o W a r e   A G    -    Leiter Commerce Kunden
______________________________________________________

Zurlindenstrasse 29             Tel  +41 61 826 93 00
CH-4133 Pratteln                Fax  +41 61 826 93 01
Schweiz                         Web  http://www.imp.ch
______________________________________________________

------------------------------

Message: 5
Date: Mon, 25 Jan 2016 08:16:19 -0200
From: Vinicius Fontes <vinicius at aittelecom.com.br>
To: Asterisk Users Mailing List - Non-Commercial Discussion
	<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] set framing on dynamic interface DAHDI
Message-ID:
	<CAP_GNRnKh_p2T-9X+wfP2Aeni0mKcaUc1MhDPtmxxB3POzEpWA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

You can do it like this:

dynamic=eth,eth3/04:74:a1:00:05:8e/1,31,0
bchan=32-46,48-62
dchan=47

2016-01-22 23:22 GMT-02:00 Rafael dos Santos Saraiva <rafaelsnsa at gmail.com>:

> Hi
>
> I working with DAHDI Dynamic Interfaces using ethernet boards. I need set
> the framing to CCS, but the documentation of DAHDI not refer to it. My
> question is: there is a way to do this?
>
> *system.conf*
> dynamic=eth,enp0s8/00:00:00:00:00:01/0,31,0
> echocanceller=mg2,1-15,17-31
> bchan=1-15,17-31
> dchan=16
> alaw=1-15,17-31
>
> *dahdi_scan*
> [1]
> active=yes
> alarms=RED
> description=Dynamic 'eth' span at 'enp0s8/00:00:00:
> name=DYN/eth/enp0s8/00:0
> manufacturer=
> devicetype=DYN/eth/enp0s8/00:00:00:00:00:01/0
> location=
> basechan=1
> totchans=31
> irq=0
> type=digital-DYNAM
> syncsrc=0
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=B8ZS,AMI,HDB3
> framing_opts=ESF,D4,CCS,CRC4
> coding=
> framing=CAS
>
>
> Thank's in advance.
>
>
>
> [image: Sua Foto] <rafaelsnsa at gmail.com> Rafael S. Saraiva
> Porto Alegre - RS | Mobile:  (51) 8174-7956
> <http://br.linkedin.com/pub/rafael-saraiva/52/aab/230>
> <https://plus.google.com/u/0/+RafaelSaraivaRS>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160125/c2b628f0/attachment-0001.html>

------------------------------

Message: 6
Date: Mon, 25 Jan 2016 05:27:56 -0500
From: Doug Lytle <support at drdos.info>
To: Asterisk Users Mailing List - Non-Commercial Discussion
	<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] t.38 fax over IAX2?
Message-ID: <sig.2832d5a2b1.56A5F8AC.9090301 at drdos.info>
Content-Type: text/plain; charset=UTF-8; format=flowed

Benoit Panizzon wrote:
> Google hints to me, that T.38 fax reception over IAX2 is possible with
> IAXMODEM. So I suppose udptl t.38 should also transparently be passed
> between SIP and IAX2. But I find no way to configure t38 on a IAX2
> channel.

This would be incorrect.

IAXMODEM does not support T.38.

I'm currently using HylaFAX+ in several of our facilities that are 
connected by IAX2, what I do is to receive the incoming fax, convert to 
a print stream or pdf and print the fax out to the remote 'fax printer'.

Or, I email the converted PDF to the recipient.

Doug

------------------------------

Message: 7
Date: Mon, 25 Jan 2016 18:34:01 +0100
From: Administrator TOOTAI <admin at tootai.net>
To: Asterisk Users <asterisk-users at lists.digium.com>
Subject: [asterisk-users] Asterisk 13.7.0 failed to start - PJSIP
	2.4.5
Message-ID: <56A65C89.3040009 at tootai.net>
Content-Type: text/plain; charset=utf-8; format=flowed

Hello,

We installed the subject detailed versions on a uptodate debian wheezy. 
When starting Asterisk we get

  Loading chan_pjsip.so.
   == Registered RTP glue 'PJSIP'
   == Registered channel type 'PJSIP' (PJSIP Channel Driver)
18:26:10.812 sip_endpoint.c !Module "mod-refer" registered
asterisk: ../src/pjsip-simple/evsub.c:417: pjsip_evsub_register_pkg: 
Assertion `mod_evsub.mod.id != -1' failed.

Any clue on what could be the problem ?

Thanks

-- 
Daniel

------------------------------

_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

End of asterisk-users Digest, Vol 138, Issue 19
***********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160125/9085ae84/attachment.html>