[asterisk-users] is there some blocking in 11.21.0
geisj at pagestation.com
Thu Jan 21 08:02:28 CST 2016
>>On Thursday 21 Jan 2016, Jerry Geis wrote:
>>* I am using the AMI interface to start calls.
*>> >>* At one point I have a 10 second delay "Wait(10)" in the dialplan...
*>>* During this time it "seems" that if I then connect with the manager
*>>* and place a call that nothing happens till the 10 seconds is done...
*>> >>* I am requesting Async yes...
*>>* manager_str Action: Originate[CR ][LF ]Async: Yes[CR ][LF ]Channel:
*>>* SIP/430[CR ][LF] (this is the first part of the AMI string)
*>> >>* How can I get past that... I want the other call to happen right away.
>Use Priority: to begin at the dialplan step after the Wait() command.
Thanks AJS - Sorry, I was not clear enough.
Its not the command right after the Wait(10) that is being delayed....
I have another process that issuing the commands to the AMI.
Its basically like this:
AGI( run to bring items into conference SIP/100 & SIP/101 lets say)
ConfBridge(to take this user into above conference)
But the SIP/100 and SIP/101 calls do not take place until a second delay.
Why are the SIP/100&SIP/101 calls delayed during the Wait(10) ?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the asterisk-users