[asterisk-users] Asterisk 13 - realtime + static modes
no7find at gmail.com
Mon Feb 2 11:18:30 CST 2015
On 2 February 2015 at 15:12, Joshua Colp <jcolp at digium.com> wrote:
> Sunny wrote:
>> In Asterisk 11 it is possible to set extensions on DB table (sipppers)
>> and also in sip.conf.
>> But in Asterisk 13 apparently this is not possible: as I tried to set in
>> ps_endpoints and also in pjsip.conf but only the realtime endpoints are
>> Is there a way to use realtime + static modes at the same time for the
>> ps_endpoints lookup using PJSIP.
> Yes. The sorcery.conf file controls this and allows specifying multiple
> things. It would be like follows:
> Realtime will get queried first followed by the configuration file. If you
> want to change the order then swap their placement.
> Joshua Colp
> Digium, Inc. | Senior Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com & www.asterisk.org
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
Yeah, it works now. Thank you Joshua!
However I'm getting following error:
[2015-02-02 16:55:56] ERROR res_sorcery_config.c: Could not create
an object of type 'endpoint' with id '192.168.1.3' from configuration file
my endpoint is defined as:
type = endpoint
context = inbound
dtmf_mode = inband
disallow = all
allow = alaw
allow = ulaw
aors = 192.168.1.3
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the asterisk-users