[asterisk-users] CLI command to see if SRTP is active?

Rusty Newton rnewton at digium.com
Mon Mar 31 13:37:59 CDT 2014

On Mon, Mar 31, 2014 at 1:26 PM, Rusty Newton <rnewton at digium.com> wrote:
> On Fri, Mar 28, 2014 at 7:39 PM, Patrick Laimbock <patrick at laimbock.com> wrote:
>> Hi,
>> I've setup TLS/SRTP with Asterisk 11.8.1 and wonder if there is a CLI
>> command to see if SRTP is active on a channel/call. I went through sip show
>> ... and core show channel... and did not see any mentioning of SRTP while
>> there is an SRTP call active.
> I don't have any encrypted calls up in front of me at this second to
> provide an example, however if you are just wanting to verify SRTP is
> active for a call you will see SRTP related messages on the CLI if you
> turn up DEBUG message verbosity and have it going to the console, or
> else possibly with output from "rtp set debug on".
> As for the "show channels" type commands, it may say something about
> encryption rather than "SRTP" directly. I'll take a look later if I
> get a chance.

I see your issue on the tracker now, posting the link here for the
sake of those who read the archives

Rusty Newton
Digium, Inc. | Community Support Manager
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
direct: +1 256 428 6200

Check us out at: http://digium.com & http://asterisk.org

More information about the asterisk-users mailing list