[asterisk-users] T1 Card RED ALARM
stotaro at totarotechnologies.com
Tue Jun 24 14:16:45 CDT 2014
Remember to always check your cables first.
On Tue, Jun 24, 2014 at 1:47 PM, arun kumar <arunvsadnikov at gmail.com> wrote:
> Thank you Josh for your valuable reply. I will do try changing the server
> and let you know what happening.
> On Tue, Jun 24, 2014 at 8:39 PM, Josh Metzger <joshdmetzger at gmail.com>
>> On Tue, Jun 24, 2014 at 5:25 AM, arun kumar <arunvsadnikov at gmail.com>
>>> Hello All,
>>> I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect
>>> T1 lines it goes in RED. When I do connect the same line on a different
>>> Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1
>>> Card for any hardware failures. I heard about loopback test , how helpful
>>> it is?
>>> Here are my configuration
>>> Zaptel Configuration
>>> SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>> 24 channels configured
>> It could still be some sort of system config issue, even if you think
>> everything is configured the same. Have you tried moving the T1 card from
>> the "Bad" system to the "good" system? That will at least help narrow down
>> if it's a bad card / port, or a config issue.
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the asterisk-users