[asterisk-users] T1 Card RED ALARM

[arun kumar]

Thank you Josh for your valuable reply. I will do try changing the server
and let you know what happening.


~Arun


On Tue, Jun 24, 2014 at 8:39 PM, Josh Metzger <joshdmetzger at gmail.com>
wrote:

>
>
> On Tue, Jun 24, 2014 at 5:25 AM, arun kumar <arunvsadnikov at gmail.com>
> wrote:
>
>> Hello All,
>>
>>     I have a Digium Wildcard TE410P Quad-Span T1 Card, when I do connect
>> T1 lines it goes in RED. When I do connect the same line on a different
>> Server (Same Model T1 Card) it works fine. How do I examine/diagnose my T1
>> Card for any hardware failures. I heard about loopback test , how helpful
>> it is?
>>
>>     Here are my configuration
>>     /etc/zaptel.conf
>>     span=1,1,0,esf,b8zs
>>     bchan=1-23
>>     dchan=24
>>
>>     Zaptel Configuration
>>     ======================
>>     SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>     24 channels configured
>>
>> Thanks
>> ~Arun
>>
>>
> It could still be some sort of system config issue, even if you think
> everything is configured the same.  Have you tried moving the T1 card from
> the "Bad" system to the "good" system?  That will at least help narrow down
> if it's a bad card / port, or a config issue.
>
> -Josh
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140624/b3f9c714/attachment.html>