[asterisk-users] PRI Error on span 1: Received MDL/TEI management message, but configured for mode other than PTMP

Eric Wieling EWieling at nyigc.com
Wed Feb 19 10:24:48 CST 2014


A reboot of the system after hours appears to have solved the issue.


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of jg
Sent: Wednesday, February 19, 2014 11:15 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PRI Error on span 1: Received MDL/TEI management message, but configured for mode other than PTMP

Eric!

The pcap trace seems to contain only idle data, and there is nothing unusual.

As far as I know, PRI always uses  the static TEI value of  0, as there is only  a single "terminal equipment (TE). The TEI assignment procedure is only relevant if there is a BRI connection on a so called "S0 bus" and the TE operates in point-to-multipoint mode. Then the automatically assigned TEI is within the range 64 to 126. Sangoma ISDN products using DAHDI/libpri do not have any problem with this in any mode.

There are always spurious MDL (related  to supervisory frames, or so) messages, but they have no impact on actual calls.

If there many calls on ISDN lines and you need to restart Asterisk/DAHDI/Wanpipe, then it is likely that the system is in an inconsistent state. Some phones ring, but cannot be answered, or answered and the other side cannot hear the other side, and stuff like that. I don't see right now how this relates to your problem, but you could try to capture the SETUP (followed by CALL PROCEEDING, ALERTING, CONNECT, STATUS, ...) messages from in- and outbound calls and log what happens.

jg

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list