[asterisk-users] IAX2 trunk on IPV6

[Matthew Jordan]

On Tue, Apr 29, 2014 at 1:06 AM, Xengis Khan <xengiskhan at gmail.com> wrote:

> Hi,
> I have installed asterisk-1.8.25.0 on an Ubuntu server which has both an
> ipv6 ip and ipv4 ip(real ip) assigned. And I have a client ubuntu with only
> ipv4 ip(local ip) installed asterisk-1.8.25.0 . I want to configure the
> client asterisk with the server asterisk as IAX2 peer and want to connect
> to the IPV6 ip. I bind the server with ipv6 and also sending the
> registration request from the client(peer) to the ipv6 address. But its not
> peering. following is the client's iax.conf
>
> register => peer1:peer1pass@[IPV6]:port
>
> [peer1]
> type=peer
> context=topeer
> username=peer1
> secret=peer1pass
> trunk=yes
> host=XXX.XXX.XXX.XXX
> port=XXXX
> disallow=all
> allow=g729:40,g723:30
> qualify=yes
>
> Also my confusion is what value will be in 'host' property. I assigned as
> host=[IPV6]...but it shows error.
> Can anyone help with this issue.
>
>
IAX2 does not support IPv6 in that version of Asterisk. IPv6 support was
added to chan_iax2 in Asterisk 12 [1].

[1] https://wiki.asterisk.org/wiki/display/AST/New+in+12

-- 
Matthew Jordan
Digium, Inc. | Engineering Manager
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: http://digium.com & http://asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140429/e3a45b18/attachment.html>