[asterisk-users] DAHDI loading issue on Asterisk

steve at vanwambeck.net steve at vanwambeck.net
Fri Apr 18 15:36:55 CDT 2014

I think that got it... I had to make a slight change to the command
root at asterisk-pbx:/etc/dahdi# chown -R asteriskpbx:asteriskpbx
Astersisk is now showing the dahdi and pri commands. I can see channels
now from the "pri show channels" command. I think I am good to go now.

Thanks for the guidance, have a wonderful weekend!
-------- Original Message --------
Subject: Re: [asterisk-users] DAHDI loading issue on Asterisk
From: Russ Meyerriecks <rmeyerriecks at digium.com>
Date: Fri, April 18, 2014 1:15 pm
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>

On Fri, Apr 18, 2014 at 2:58 PM, <steve at vanwambeck.net> wrote:
Here is what I am showing:

asteriskpbx at asterisk-pbx:/etc/udev/rules.d$ cat dahdi.rules

ACTION!="add",  GOTO="dahdi_add_end"

# DAHDI devices with ownership/permissions for running as non-root
SUBSYSTEM=="dahdi",             OWNER="asterisk", GROUP="asterisk",

Hmm, this looks right. Does chan_dahdi.so load up properly if you "chown
-R asterisk:asterisk /dev/dahdi" ?

Russ Meyerriecks
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
direct: +1 256-428-6025
Check us out at: www.digium.com & www.asterisk.org

-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:

More information about the asterisk-users mailing list