[asterisk-users] Asterisk 12 issue

[Bakko]

Hello,

my fault. I used pjsip oficial versión.

With the git version all it's ok.

Asterisk 12 start fine with pjsip stack.

Now some tests.

Thank you

regards

El 03/09/2013 10:10, Joshua Colp escribió:
> Bakko wrote:
>> hello,
>
> Greetings,
>
>> I' trying to use Asterisk 12 Alpha.
>>
>> Compilation and instalation without issues.
>>
>> When I try to start asterisk with:
>>
>> asterisk -cvvvvvvvvvvvvvvv
>>
>> i see this error on the console:
>>
>> 17:09:43.559 sip_endpoint.c !Module "mod-refer" registered
>> asterisk: ../src/pjsip-simple/evsub.c:415: pjsip_evsub_register_pkg:
>> Assertion `mod_evsub.mod.id != -1' failed.
>>
>> Any hints?
>
> There's three possible reasons for this:
>
> 1. The new SIP modules have been linked statically which means each 
> module has an independently operating copy. As things are written to 
> operate as a whole this can fail miserably. To see if this is the case 
> you can run:
>
> ldd /usr/lib/asterisk/modules/res_pjsip.so
>
> If the output contains no reference to "libpj.so" then that is your 
> problem and you will need to follow the instructions on the wiki to 
> remove an old pjproject.
>
> 2. The res_sip_pubsub.so module is not being loaded or has not been 
> built.
>
> You can check the console output when loading to see if this is the 
> case, although the ultimate reason may be below this.
>
> 3. A slight derivative on the above is that the module will be loaded, 
> but something is trying to use it before hand.
>
> You can manually modify your modules.conf to have an explicit load 
> order for the new SIP modules. This can require some trial/error. If 
> this resolves the issue then we need to adjust things to make it 
> happen "automagically". As such if this is the case please open a JIRA 
> issue so we can ensure others do not run into the same issue.
>
> Cheers,
>
> PS: Thanks for giving Asterisk 12 a go and sorry you ran into this 
> problem!
>