[asterisk-users] issue after install dahdi

[Salaheddine Elharit]

ok thanks for your comment i really appreciate it


best regards


2013/10/23 Russ Meyerriecks <rmeyerriecks at digium.com>

> On Wed, Oct 23, 2013 at 11:27 AM, Salaheddine Elharit <
> salah.elharit200 at gmail.com> wrote:
>
>> hi
>>
>> the issue has been solved after change the span from span
>> =1,1,0,ccs,hdb3 to span =1,0,0,ccs,hdb3
>> thanks for everyone
>>
>
> Salaheddine,
>
> Just a comment here: I'm not sure who your spans are connected to but, it
> is highly unlikely that this changed is what fixed your problem. I think
> it's more likely that the process of reloading something else actually
> fixed it. What you are doing here is telling span 1 to provide (or ignore)
> timing to the other end. If it's the case that you're connected to a public
> e1 pri provider, this probably isn't the correct configuration and will
> likely cause further problems like slips and alarms. If it's connected to
> something internal to your business, (like a channel bank), then it's fine.
>
> --
> Russ Meyerriecks
> Digium, Inc. | Linux Kernel Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> direct: +1 256-428-6025
> Check us out at: www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20131024/d5320b54/attachment-0001.html>