[asterisk-users] How to configure NT/ptmp with Dahdi and BRI ? (Olivier)

Olivier oza_4h07 at yahoo.fr
Mon Mar 4 01:52:57 CST 2013


2013/3/3 Mc GRATH Ricardo <mcgrathr at mail2web.com>

> Hi Olivier
>
> It seems wrong configuration, because according to your mail Asterisk it
> will be acting as terminal mode (ie Patton gateway acting as network and
> asterisk as terminal).
> But Asterisk message is indicated Asterisk a s a NT mode  [  212.226050]
> wctdm24xxp 0000:0a:01.0: xhfc: Configuring port 0 span 1 in
> NT mode with termination resistance ENABLED.
> It could help by checking parameters on dahdi-channels if signalling =
> bri_cpe_ptmp # The signalling for TE mode
> Best regards
>
> Mc GRATH Ricardo
> E-Mail mcgrathr at mail2web.com
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


Maybe my previous post was not clear on that but I made two different
experiments :
A- one (successful) with Asterisk acting as terminal (TE/ptmp) and Patton
as network
B- one (unsuccessful) with Asterisk acting as network (NT/ptmp) and Patton
as terminal

Now I'm focusing on the latter case.

My /etc/dahdi/system.conf contains:
span=1,0,0,ccs,ami,nt,term

(I also tried with DISABLED termination without success)

My /etc/asterisk/dahdi-channels.conf contains:
signalling = bri_net_ptmp

... but still :
CLI> pri show spans
PRI span 1/0: In Alarm, Up, Active
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130304/86e38a73/attachment.htm>


More information about the asterisk-users mailing list