[asterisk-users] analog phone digit delay

[Justin Killen]

Values for the timeouts just before the 'cannot complete as dialed, please try your call again':

absolute: 0 
digit: 5.000 
response: 10.000

I've enabled DTMF logging to try to get a better log for interpretation.

-Justin

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Edwards
Sent: Monday, July 08, 2013 11:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] analog phone digit delay

On Mon, 8 Jul 2013, Justin Killen wrote:

> I have an installation that has analog phones connected via T1 channel 
> banks.  I’m getting complaints from users that they will enter a partial 
> number (eg 91213), then turn away to get the next few digits, and the 
> system will start dialing before they have a chance to put in the rest 
> of the dialing string.  Is there a way to increase this delay?  The only 
> use these 4 dialing patterns:

Will 'show function TIMEOUT' help?

-- 
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards       sedwards at sedwards.com      Voice: +1-760-468-3867 PST
Newline                                              Fax: +1-760-731-3000