[asterisk-users] IAX2 bridge failing

Michelle Dupuis mdupuis at ocg.ca
Sat Dec 14 22:20:20 CST 2013


Ok just restart

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michelle Dupuis
Sent: Friday, December 13, 2013 11:46 AM
To: Asterisk Users List
Subject: Re: [asterisk-users] IAX2 bridge failing

I tried transfer=no, transfer=yer, and transfer=mediaonly (with a "reload" inbetween)....same result

I agree it sounds like something either end is using the wrong IP/port address somewhere in the call (yet signalling works fine).

Anything else to suggest?  I was hoping for an externalip type setting but not in iax2 (at least not in 1.4.x.x) ________________________________________
From: asterisk-users-bounces at lists.digium.com [asterisk-users-bounces at lists.digium.com] On Behalf Of Joshua Colp [jcolp at digium.com]
Sent: Friday, December 13, 2013 11:44 AM
To: Asterisk Users List
Subject: Re: [asterisk-users] IAX2 bridge failing

Michelle Dupuis wrote:
> Some more details...I noticed that the call is bridged, and audio goes 
> one way. However, the dial command still times out after 35 seconds 
> (approx), and exists non-zero.
> While the channels are up, I did an core show channel xxx and found 
> Blocking in:
> ast_waitfor_nandfds
> Is this a bug? Or something I can fix through config?

Hola,

Set "transfer=no" under the entries in iax.conf for the peers/users/friends/etc in question, reload, retry, and see if that changes the behavior. If it does then something involved may not like
IAX2 native transfers.

Cheers,

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at:  www.digium.com  & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list