[asterisk-users] Asterisk 11.5.0

[Jerry Geis]

Perfect,

that was it - Needed BOTH a
libuuid-devel
uuid-devel

Thanks,

jerry


On Mon, Aug 12, 2013 at 3:33 PM, Jerry Geis <geisj at pagestation.com> wrote:

> I did as you suggested, the make menuselect showed XXX by res_rtp_asterisk
> and said "depends on uuid(E)".
>
> rpm -qa | grep uuid
> uuid-1.6.1-10.el6.x86_64
> libuuid-2.17.2-12.9.el6_4.3.x86_64
> uuid-devel-1.6.1-10.el6.x86_64
> libuuid-2.17.2-12.9.el6_4.3.i686
>
> so the UUID-devel is present.
>
> Thoughts?
>
>
> jerry
>
>
> On Mon, Aug 12, 2013 at 3:07 PM, Jerry Geis <geisj at pagestation.com> wrote:
>
>> Thanks for the suggestion. I did a "yum install uuid-devel" it got
>> installed.
>> I did a make clean, ./configure, make again and still no res_rtp_asterisk.
>>
>>  asterisk-11.5.0]# find . |grep res_rtp
>> ./res/.res_rtp_asterisk.makeopts
>> ./res/res_rtp_multicast.exports
>> ./res/res_rtp_multicast.o
>> ./res/.res_rtp_multicast.moduleinfo
>> ./res/res_rtp_multicast.c
>> ./res/.res_rtp_multicast.o.d
>> ./res/.res_rtp_multicast.makeopts
>> ./res/res_rtp_asterisk.c
>> ./res/res_rtp_multicast.so
>> ./res/.res_rtp_asterisk.moduleinfo
>>
>> Was there something else?
>>
>> jerry
>>
>>
>>
>> On Mon, Aug 12, 2013 at 2:31 PM, Jerry Geis <geisj at pagestation.com>wrote:
>>
>>> I have been using 11.4.0 for some time. All was fine.
>>>
>>> I downloaded 11.5, extracted, run ./configure, make, make install.
>>> I got a message about
>>> res_rtp_asterisk.so was not compiled in the 11.5
>>>
>>> Sure enough I have rss_rtp_asterisk.c but not .o file and no .so file.
>>>
>>> I then looked in the config.log and nothing is in there about
>>> res_rtp_asterisk
>>>
>>> What's up?
>>>
>>> jerry
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130812/fc78d055/attachment.htm>