[asterisk-users] Digium D40 phones and Caller ID

[Christopher Harrington]

On Fri, Oct 12, 2012 at 11:47 AM, Matthew Jordan <mjordan at digium.com> wrote:
> After loading, [peer01] shows up as a known SIP endpoint.  Calling
> peer01 displays the same caller ID as before, i.e., either 101/D40 01 or
> 101/foo.  Note that none of this using the DPMA either.
Here's something important that I think I was missing. The CallerID
construct seems to be working, but only after the call is answered.
(In my testing, I didn't think to pick up the line, just ending the
call from the source if I didn't see the CID.)

Turning on SIP debugging, I can see the PAI header being sent in the
invite packet being sent to the D40 upon initiating (prior to
answering). Does this shed any light on the issue?

>> I don't know if that is necessarily true; the phones were new in box
>> but were not purchased from Digium or an authorized reseller.
>>
>
> Did they fall off the back of a truck? :-)
>
> Call anyway.  If you purchased said phones in a legitimate manner, they
> should be able to help you.
They were acquired from a company that unexpectedly imploded,
actually. I'm trying to avoid calling as that kills my ability to
multitask on my other projects; naturally I'm the "do everything" guy
at my company.

> (And, as previously suggested, you may want to make sure you've upgraded
> to the latest firmware, just to rule out any solved problems).
They are absolutely all on 1.1.0.

-- 
-Chris Harrington
ACSDi Office: 763.559.5800
Mobile Phone: 612.326.4248