[asterisk-users] Tips for installing and configuring Digum cards

[Jeff LaCoursiere]

On 10/11/2012 09:34 AM, Mitch Claborn wrote:
> In case the moderator doesn't approve my post with the attachment, 
> below is a quick and dirty transcription of the order form.
>
> Customer connecting equipment: CSU/DSU
> Circuit: DS1
> Line coding: B8ZS
> Framing: ESF
> Jack type: RJ48X / Smartjack (will that fit into the Digum card?)
> ISDN protocol: NI2
> Primary D-channel assignment: 24
> FAS
> Incoming port selection: Ascending sequential 1-24
> Indound real-time ANI delivery? yes, 10 digits
>
>
> Does anyone see any red flags or things to watch out for in these 
> specs?  Anyone configured a similar line that is willing to share your 
> config files?
>
> I'm traveling for the next several hours, so apologies if I don't 
> respond right away.
>
> Mitch
>
> On 10/10/2012 10:34 AM, Mitch Claborn wrote:
>> Tomorrow evening I'll be at a customer site installing 2 Digum cards - a
>> 4 port analog and 2 port T1.  I'd appreciate any tips, resources and
>> links that you have that might help if we run into trouble.  It will, of
>> course, be fairly late at night and relatively high pressure to get it
>> working, so I'd like to collect as much information in advance as I can.
>>
>> I was able to install and test the analog card in my lab, so not too
>> worried about that.
>> I installed the T1 card in the lab and got the system and Asterisk to
>> recognize it, but had no T1 to test with.
>>
>

Totally typical.  I don't think you will have any issues.

j