[asterisk-users] Call Termination Provider Madness

[Tim Nelson]

----- Original Message ----- 
> Have a look at your /etc/asterisk/rtp.conf file. In it you specify
> the UDP portrange your asterisk will use for RTP traffic. change the
> rtpstart and rtpend to your needs and set them open in your FW. Do
> not make the range too small each active call will normally take one
> RTP channel incoming and one RTP channel outgoing.
> I have mine set to for example: rtpstart=10000 and rtpend=10100. This
> should be enough for 100 simultanious calls.

2 RTP ports per session (inbound/outbound media)... that would mean 50 simultaneous calls, no?

--Tim