[asterisk-users] 回覆︰ 回覆︰ "Simple" failover configuration

[kingman chui]

It is needed to purchase . Any other option that is open source and free ???
 

寄件人︰ Michelle Dupuis <mdupuis at ocg.ca>
>收件人︰ kingman chui <chuikingman at yahoo.com.hk>; Asterisk Users List <asterisk-users at lists.digium.com> 
>傳送日期︰ 2012年11月16日 (週五) 8:08 AM
>主題︰ RE: [asterisk-users] 回覆︰ "Simple" failover configuration
>
>
>Or...you could use HAAST (http://www.generationd.com/) - it detects failure, switches IP to an Asterisk peer, updates routes, updates ARP tables, synchronizes settings between peers, etc.
> 
>-M-
> 
>P.S. I work for generationd, so I think the product is amazing :) 
> 
>From: asterisk-users-bounces at lists.digium.com [asterisk-users-bounces at lists.digium.com] On Behalf Of kingman chui [chuikingman at yahoo.com.hk]
>Sent: Thursday, November 15, 2012 6:34 PM
>To: Asterisk Users List
>Subject: [asterisk-users] 回覆︰ "Simple" failover configuration
>
>
>I think you can use virtual IP with a group of sip server that run in HA .
>so, only one of sipserver is handle the call and other is standby ...
>Is this what you want ...?????
>Regard/chui king man
>
>
>寄件人︰ Danny Nicholas <danny at debsinc.com>
>>收件人︰ 'Asterisk Users Mailing List - Non-Commercial Discussion' <asterisk-users at lists.digium.com> 
>>傳送日期︰ 2012年11月15日 (週四) 11:31 PM
>>主題︰ Re: [asterisk-users] "Simple" failover configuration
>>
>>You can actually configure at least some Polycom phones to 3 or more SIP
>>servers.  Your problem is going to be that when one of your servers is down
>>for whatever reason, the "line key" attached to that server will be "off".
>>In a "Dual Server" environment, I would lean toward putting something like
>>Kamailio (sp) in line so it can determine which server is the active one.
>>
>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Wieling
>>Sent: Thursday, November 15, 2012 9:27 AM
>>To: chris at acsdi.com; Asterisk Users Mailing List - Non-Commercial Discussion
>>Subject: Re: [asterisk-users] "Simple" failover configuration
>>
>>Polycom phones after firmware 2.x register to BOTH the primary and backup
>>servers.  
>>
>>On Thu, Nov 15, 2012 at 8:59 AM, Chris Nighswonger
>><cnighswonger at foundations.edu> wrote:
>>
>>    
>>    Would the simplest approach to failover be to just configure my
>>    primary asterisk server as the first SIP server and my backup as the
>>    second?
>>    
>>--
>>_____________________________________________________________________
>>-- Bandwidth and Colocation Provided by http://www.api-digital.com/ -- New to
>>Asterisk? Join us for a live introductory webinar every Thurs:
>>              http://www.asterisk.org/hello
>>
>>asterisk-users mailing list
>>To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>--
>>_____________________________________________________________________
>>-- Bandwidth and Colocation Provided by http://www.api-digital.com/ --
>>New to Asterisk? Join us for a live introductory webinar every Thurs:
>>              http://www.asterisk.org/hello
>>
>>asterisk-users mailing list
>>To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20121116/fe227726/attachment.htm>