[asterisk-users] "Simple" failover configuration

[Danny Nicholas]

You can actually configure at least some Polycom phones to 3 or more SIP
servers.  Your problem is going to be that when one of your servers is down
for whatever reason, the "line key" attached to that server will be "off".
In a "Dual Server" environment, I would lean toward putting something like
Kamailio (sp) in line so it can determine which server is the active one.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Wieling
Sent: Thursday, November 15, 2012 9:27 AM
To: chris at acsdi.com; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] "Simple" failover configuration

Polycom phones after firmware 2.x register to BOTH the primary and backup
servers.   

On Thu, Nov 15, 2012 at 8:59 AM, Chris Nighswonger
<cnighswonger at foundations.edu> wrote:

	
	Would the simplest approach to failover be to just configure my
	primary asterisk server as the first SIP server and my backup as the
	second?
	
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users