[asterisk-users] Asterisk 11 / FreePBX: Incoming calls timeout after 13 seconds, outgoing works perfectly

Miguel Oyarzo miguelaustro at gmail.com
Sun Nov 11 19:47:00 CST 2012


On Mon, Nov 12, 2012 at 11:17 AM, Markus <universe at truemetal.org> wrote:

> Am 11.11.2012 11:46, schrieb Eric Kuhnke:
>
>  I'm trying to troubleshoot an issue with my SIP service.  All outgoing
>> calls work normally.  The following is a SIP debug log from Asterisk.  The
>> test setup is as follows:
>>
>
> Miguel already explained what's going on. Have a look at the SIP packets
> to figure out more. On the Asterisk box:
>
> tcpdump -nnqt -s 0 -A -i eth0 port 5060
>
> Also, check your router/firewall logs, respectively activate them, to find
> out why the packets are not going through.
>
> Maybe also try
>
> qualify=yes
>
>
yes, correct.
In addition, He might being notifying to the calling part incorrectly about
the called part is behind a nat :)

http://pastebin.com/1Mgn72vN  (line 71: nat=no)


-- 
==============================**====
Miguel Oyarzo
Senior Systems Design Engineer
Linux User: # 483188 - counter.li.org
http://au.linkedin.com/in/mikeaustralia
Melbourne, Australia
==============================**====
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20121112/e0cae404/attachment.htm>


More information about the asterisk-users mailing list