[asterisk-users] TE820 hardware detection

[Justin Killen]

I just installed a TE820 octal span T1 card, and it's not showing up in dahdi_hardware output.  This was installed into a test machine that already has a TDM800P card in it, and that one is showing up and working fine.  Is there some kernel module that I'm missing?


Lspci:
05:04.0 Ethernet controller: Digium, Inc. Wildcard TDM800P 8-port analog card (rev 11)
21:08.0 Communication controller: Digium, Inc. Device 1820 (rev 02)

Lsdahdi:
### Span  1: WCTDM/0 "Wildcard TDM800P" (MASTER)
  1 FXS        FXOKS       (In use)
  2 FXS        FXOKS       (In use)
  3 FXS        FXOKS       (In use)
  4 FXS        FXOKS       (In use)
  5 FXO        FXSKS       (In use)  RED
  6 FXO        FXSKS       (In use)  RED
  7 FXO        FXSKS       (In use)
  8 FXO        FXSKS       (In use)  RED

Dahdi_hardware:
pci:0000:05:04.0     wctdm24xxp+  d161:0800 Wildcard TDM800P

/etc/rc.d/init.d/dahdi start:
Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcte12xp:                                                [  OK  ]
  wct1xxp:                                                 [  OK  ]
  wcte11xp:                                                [  OK  ]
  wctdm24xxp:                                              [  OK  ]
  wcfxo:                                                   [  OK  ]
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]
  wctc4xxp:                                                [  OK  ]
  xpp_usb:                                                 [  OK  ]


This is on a FreePBX 1.817.210.58 install - I'm not sure what the dahdi tools version is.
-Justin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20121107/598ec873/attachment.htm>