[asterisk-users] [Slightly OT] Audiocodes Mediant Failover Routing with Asterisk

[Tim Nelson]

----- Original Message -----
> Greetings-
> 
> First off, my apologies for the slightly OT nature of this post. It
> does involve Asterisk to a degree, but errs a bit on the side of
> Audiocodes inquiry. I accept all responsibility for my actions and the
> consequences. :)
> 
> The scenario is this: I have an Asterisk box connected to a Mediant
> 2000 (M2K) via T1. Calls made via DAHDI->T1->M2K are then routed by
> the M2K via SIP using the Audiocodes Tel-to-IP routing tables to a
> remote IP. This has worked quite well for some time.
> 
> I now want to add multiple IP's to the routing table for failover.
> However, when adding additional entries to the Tel-to-IP routing
> table, and the first entry fails, the other IPs are not attempted. The
> first IP is attempted, and if it fails, the call fails instead of
> trying any of the additional IPs in the Tel-to-IP routing table.
> 

*BUMP*

Any ideas from the brilliant folks here?

--Tim