[asterisk-users] confbridge

[Jerry Geis]

> Hi Jerry,
>
> Firstly, in logging.conf, make sure you have a line as follows:
>
> full =>  notice,warning,error,debug,verbose,dtmf,fax
>
> If you made any changes, then in the asterisk CLI, do: reload logger
>
> Then again in the CLI, do:
>
> set verbose 5
> set debug 5
>
> Then try your scenario and look afterwards at /var/log/asterisk/full.
>


Tony

So I commented in the "full" in the logger and restarted. set verbose 
and debug.
the only thing I saw was below. dsp.c Setup Tone. See below.

[Aug 22 08:02:31] DEBUG[31329] channel.c: Didn't receive a media frame 
from 
Local/app_confbridge_call_out at smvoice-local-public-address-playfile-621a;2 
within 500 ms of answering. Continuing anyway
[Aug 22 08:02:31] DEBUG[31329] app_confbridge.c: Trying to find 
conference bridge 'PA0001'
[Aug 22 08:02:31] DEBUG[31329] bridging.c: Joining bridge channel 
0x7fb07c0032e8 to bridge 0x7fb07801e8f8
[Aug 22 08:02:31] DEBUG[31329] bridging.c: Added channel 
Local/app_confbridge_call_out at smvoice-local-public-address-playfile-621a;2(0x7fb07800f4a8) 
to bridge array on 0x7fb07801e8f8, new count is 2
[Aug 22 08:02:31] DEBUG[31329] bridging.c: Bridge 0x7fb07801e8f8 is 
happy that channel 
Local/app_confbridge_call_out at smvoice-local-public-address-playfile-621a;2 
already has read format slin
[Aug 22 08:02:31] DEBUG[31329] bridging.c: Bridge 0x7fb07801e8f8 is 
happy that channel 
Local/app_confbridge_call_out at smvoice-local-public-address-playfile-621a;2 
already has write format slin
[Aug 22 08:02:31] DEBUG[31329] bridging.c: Giving bridge technology 
softmix notification that 0x7fb07c0032e8 is joining bridge 0x7fb07801e8f8
[Aug 22 08:02:31] DEBUG[31329] dsp.c: Setup tone 1100 Hz, 500 ms, 
block_size=160, hits_required=21
[Aug 22 08:02:31] DEBUG[31329] dsp.c: Setup tone 2100 Hz, 2600 ms, 
block_size=160, hits_required=116
[Aug 22 08:02:31] DEBUG[31340] pbx.c: Launching 'AGI'


Also I dont want to do any transcoding and its talking about slin 
format. seems likes thats the
native format for conference. Do I need to add slin to my formats for 
the end locations. All I have right now are ulaw,alaw,gsm.

Rename the sounds directory (I just tried again) did nothing this time. 
Not sure what I had
done??? Anyway from above looks like the dsp.c tone is whats doing it.

What next?

Jerry