[asterisk-users] Strange problem on ougoing call
Olivier CALVANO
o.calvano at gmail.com
Thu Apr 26 03:13:11 CDT 2012
Perfect that's work ;=)
very thanks
Le 25 avril 2012 10:19, Olivier CALVANO <o.calvano at gmail.com> a écrit :
> Ok thanks i test.
>
> I put "match_auth_username=yes" on the two server ?
>
> And for insecure, into the realtime database ? or into sip.conf of the
> second server ?
>
> best regards
> olivier
>
>
>
> Le 25 avril 2012 09:34, Leandro Dardini <ldardini at gmail.com> a écrit :
>>
>>
>> 2012/4/25 Olivier CALVANO <o.calvano at gmail.com>
>>>
>>> Sure, sorry for the Confusion ;=)
>>>
>>>
>>>
>>>
>>> Server A "Trader":
>>> Asterisk Server 1.6.x for call routing only.
>>> IP Adress: 172.16.0.11
>>> Use Realtim on MySQL Database
>>> This server route all call to a lot of VoIP Carrier.
>>>
>>>
>>> Server B "Ipbx"
>>> Asterisk Server 1.6.x for connect a lot of Linksys SPA942 phone.
>>> IP Adress: 172.16.0.70
>>> Second IP: 172.16.1.70 (used for phone lan)
>>> Use Realtim on MySQL Database
>>> This server route all call to a lot of VoIP Carrier.
>>>
>>>
>>> Linksys SPA942 A:
>>> IP Adress: 172.16.1.200
>>> Connected in SIP at Server B IPBX
>>> use sip.conf (no realtime)
>>> context: I-User01
>>>
>>>
>>> Linksys SPA942 B:
>>> IP Adress: 172.16.1.220
>>> Connected in SIP at Server B IPBX
>>> use sip.conf (no realtime)
>>> context: I-User02
>>>
>>>
>>>
>>> On Server A "Trader", we have two sip account:
>>> accountname: "USER01" for user in group 1
>>> accountname: "USER02" for user in group 2
>>>
>>> On Server B "Ipbx", i use registry:
>>> register => USER01:1234 at 172.16.0.11/USER01
>>> register => USER02:5678 at 172.16.0.11/USER02
>>> for two connection to the Trader Server. Registry is good:
>>> on server A "Trader":
>>>
>>> trader*CLI> sip show registry
>>> Host dnsmgr Username Refresh State
>>> Reg.Time
>>> 172.16.0.11:5060 N USER01 105 Registered
>>> Tue, 24 Apr 2012 15:58:58
>>> 172.16.0.11:5060 N USER02 105 Registered
>>> Tue, 24 Apr 2012 15:58:59
>>>
>>>
>>> On server B "Ipbx", i have into my sip.conf after the registry:
>>>
>>> [USER01]
>>> type=friend
>>> username=USER01
>>> secret=1234
>>> host=172.16.0.11
>>> qualify=yes
>>> dtmf=rfc2833
>>> nat=no
>>> canreinvite=no
>>> canredirect=no
>>> dtmfmode=rfc2833
>>> disallow=all
>>> allow=alaw
>>> context=I-User01
>>> musiconhold=default
>>> insecure=port,invite
>>>
>>> [USER02]
>>> type=friend
>>> username=USER02
>>> secret=5678
>>> host=172.16.0.11
>>> qualify=yes
>>> dtmf=rfc2833
>>> nat=no
>>> canreinvite=no
>>> canredirect=no
>>> dtmfmode=rfc2833
>>> disallow=all
>>> allow=alaw
>>> context=I-User01
>>> musiconhold=default
>>> insecure=port,invite
>>>
>>> and in extensions.conf:
>>>
>>> [I-User01]
>>> exten => _0XX.,1,Dial(SIP/USER01/${EXTEN:1},90,r)
>>>
>>> [I-User02]
>>> exten => _0XX.,1,Dial(SIP/USER02/${EXTEN:1},90,r)
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> When i call with Linksys SPA942 A, i use the context "I-User01" and
>>> the call are sent
>>> to SIP account "USER01" and No problems.
>>>
>>> When i call with Linksys SPA942 B, i use the context "I-User02" and
>>> the call are sent
>>> to SIP account "USER02" but Server A "Trader" reject the call
>>> immediatly with this error:
>>>
>>> [Apr 24 16:02:12] WARNING[1456]: chan_sip.c:10992 check_auth: username
>>> mismatch, have <USER01>, digest has <USER02>
>>> [Apr 24 16:02:12] NOTICE[1456]: chan_sip.c:18096
>>> handle_request_invite: Failed to authenticate device "Olivier"
>>> <sip:906280 at 172.16.0.70>;tag=as0cd775ab
>>>
>>> "Olivier" and "906280" is the information that i have on the Linksys
>>> SPA942 B, 906280 is the username used between
>>>
>>>
>>>
>>>
>>> best ? hihi
>>> Olivier
>>>
>>>
>>>
>>>
>>>
>>> Le 25 avril 2012 06:38, SamyGo <govoiper at gmail.com> a écrit :
>>> > Hi,
>>> > Lots of mixing and confusing stuff - Can you re-explain the topology you
>>> > are
>>> > trying to achieve with proper IP addresses and declared sip ext. names.
>>> >
>>> >> When i call with the phone connected to I-User01, no problems, that's
>>> >> work but when i call
>>> >> with the second phone (use I-User02) i have a error:
>>> >
>>> >
>>> > Somehow it reminds of the same situation I always face when a peer is
>>> > declared with the same name as of the dialing one on second server -
>>> > only
>>> > Its just not registered there instead registered on server-1.
>>> > So when the call comes in from server-1 to server-2 fromuser=olivier
>>> > which
>>> > is not registered on server-2 but is declared. Server-2 thinks that this
>>> > is
>>> > my valid extension but it is not registered with me and so lets
>>> > authenticate
>>> > this one and here it fails and rejects the call.
>>> >
>>> > BR,
>>> > Sammy.
>>> >
>>> > On Tue, Apr 24, 2012 at 7:06 PM, Olivier CALVANO <o.calvano at gmail.com>
>>> > wrote:
>>> >>
>>> >> Hi
>>> >>
>>> >> i have a strange problems on my asterisk server:
>>> >>
>>> >> I have two asterisk server.
>>> >>
>>> >> On the first, i use realtime with a MySQL Database,
>>> >> i have two user:
>>> >> USER01
>>> >> USER02
>>> >> exactly the same configuration only username and password has
>>> >> different.
>>> >>
>>> >>
>>> >> On my second server (phone is connected on this server):
>>> >>
>>> >> I have in sip.conf:
>>> >>
>>> >> register => USER01:1234 at 172.16.0.11/USER01
>>> >> register => USER02:5678 at 172.16.0.11/USER02
>>> >>
>>> >> [USER01]
>>> >> type=friend
>>> >> username=USER01
>>> >> secret=1234
>>> >> host=172.16.0.11
>>> >> qualify=yes
>>> >> dtmf=rfc2833
>>> >> nat=no
>>> >> canreinvite=no
>>> >> canredirect=no
>>> >> dtmfmode=rfc2833
>>> >> disallow=all
>>> >> allow=alaw
>>> >> context=I-User01
>>> >> musiconhold=default
>>> >> insecure=port,invite
>>> >>
>>> >> [USER02]
>>> >> type=friend
>>> >> username=USER02
>>> >> secret=5678
>>> >> host=172.16.0.11
>>> >> qualify=yes
>>> >> dtmf=rfc2833
>>> >> nat=no
>>> >> canreinvite=no
>>> >> canredirect=no
>>> >> dtmfmode=rfc2833
>>> >> disallow=all
>>> >> allow=alaw
>>> >> context=I-User01
>>> >> musiconhold=default
>>> >> insecure=port,invite
>>> >>
>>> >>
>>> >> i see the registration:
>>> >>
>>> >> ipbx*CLI> sip show registry
>>> >> Host dnsmgr Username Refresh State
>>> >> Reg.Time
>>> >> 172.16.0.11:5060 N USER01 105 Registered
>>> >> Tue, 24 Apr 2012 15:58:58
>>> >> 172.16.0.11:5060 N USER02 105 Registered
>>> >> Tue, 24 Apr 2012 15:58:59
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> i have one phone connected to the context "I-User01" and another
>>> >> connected to "I-User02"
>>> >>
>>> >> When i call with the phone connected to I-User01, no problems, that's
>>> >> work but when i call
>>> >> with the second phone (use I-User02) i have a error:
>>> >>
>>> >>
>>> >> On the first server:
>>> >> [Apr 24 16:02:12] WARNING[1456]: chan_sip.c:10992 check_auth: username
>>> >> mismatch, have <USER01>, digest has <USER02>
>>> >> [Apr 24 16:02:12] NOTICE[1456]: chan_sip.c:18096
>>> >> handle_request_invite: Failed to authenticate device "Olivier"
>>> >> <sip:906280 at 172.16.0.70>;tag=as0cd775ab
>>> >>
>>> >>
>>> >> The exten:
>>> >>
>>> >> On I-User01: exten => _0XX.,1,Dial(SIP/USER01/${EXTEN:1},90,r)
>>> >> On I-User02: exten => _0XX.,1,Dial(SIP/USER02/${EXTEN:1},90,r)
>>> >>
>>> >>
>>> >>
>>> >> i i change on the I-User02:
>>> >> Dial(SIP/USER02/${EXTEN:1},90,r)
>>> >> in
>>> >> Dial(SIP/USER01/${EXTEN:1},90,r)
>>> >> all call work's.
>>> >>
>>> >>
>>> >> anyone have a idea ? i think's that i have a error but don't see where
>>> >>
>>> >> best regards
>>> >> Olivier
>>> >>
>>> >> --
>>> >> __
>>
>>
>> Remove the "insecure=invite,port" and maybe add the match_auth_username=yes
>> in the sip.conf general section
>>
>> Leandro
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list