[asterisk-users] DID and how the caller id will appear

[bilal ghayyad]

Dears;

Yes, I tried all what mentioned, and did not work ... So I am contacting the service provider.

Thanks a lot.
Regards
Bilal


-------------------

> 
> Hi
> 
> try to add this
> 
> exten => _90ZXXXXXXXX,1,Set(CALLERPRES()=allowed)
> exten => _90ZXXXXXXXX,n,Set(CALLERID(num)=5631040)
> 
> if you get the same result that is means that you don't
> have permission from
> your provider
> 
> 
> kind regards
> 
> 2011/9/26 C F <shmaltz at gmail.com>
> 
> > Confirm with your provider that allow you to set
> caller id on outbound.
> >
> >
> > On Sun, Sep 25, 2011 at 1:59 PM, bilal ghayyad <bilmar_gh at yahoo.com>
> > wrote:
> > > Dear;
> > >
> > > By the way, the asterisk version is: 1.8.4.2
> > >
> > > Yes I tried Set(CALLERID(num)=5631040) as shown
> in the below dialing, and
> > no success. Also I tried Set(CALLERID(num)=1040) and I
> tried
> > Set(CALLERID(num)=065631040) as the city code is 06
> and when we call any
> > mobile, it is appearing 065631040, but all of this did
> not work.
> > >
> > > Do I have to use SetCallerPres? What is the
> value?
> > >
> > > The E1 is located in Jordan and it is PRI with 30
> channels. Is there any
> > thing need to be set other than Set(CALLERID(num)? I
> am afraid that I have
> > to set a specific value for SetCallerPress !
> > >
> > > Well, I have also a question: What should I set
> the callerid when I am
> > configuring the IP Phone in the sip.conf?
> > >
> > > By the way: what is the difference between using
> > Set(CALLERID(num)=5631040) and the callerid in the
> sip.conf?
> > >
> > > Kindly find below my dialing plan:
> > >
> > > exten =>
> _90ZXXXXXXXX,1,Set(CALLERID(num)=5631040)
> > > exten =>
> >
> _90ZXXXXXXXX,2,MixMonitor(${CHANNEL}${EXTEN:1}${STRFTIME(${EPOCH},,%Y%m%d%H%M%S)}.wav)
> > > exten =>
> _90ZXXXXXXXX,3,Dial(${PSTNTRUNK}/${EXTEN:1})
> > > exten =>
> _90ZXXXXXXXX,4,Playback(vm-nobodyavail)
> > > exten => _90ZXXXXXXXX,5,Hangup()
> > > exten => _90ZXXXXXXXX,104,Congestion() ; if no
> channel available
> > > exten => _90ZXXXXXXXX,105,Hangup()
> > >
> > >
> > > -----------------------
> > >
> > >
> > >>
> > >> Set(CALLERID(num)=5631040)
> > >> add this before the Dial command.
> > >>
> > >> On Sat, Sep 24, 2011 at 4:03 PM, bilal
> ghayyad <bilmar_gh at yahoo.com>
> > >> wrote:
> > >> > Hi All;
> > >> >
> > >> > The DID range that we took from the
> telecom starts
> > >> from 1030 and end by 1059, now whenever we
> place a call, the
> > >> destination see the number 5631030. I gave
> the phone
> > >> extension 1040, and when I call, still the
> destination see
> > >> the number is 5631030?
> > >> >
> > >> > Kindly find below the configuration of
> the extension
> > >> 1040, please what I have also to configure so
> when this
> > >> extension make a call, the destination see it
> 5631040?
> > >> >
> > >> > [1040]
> > >> > type=friend
> > >> > host= dynamic
> > >> > callerid=1040
> > >> > disallow=all
> > >> > allow=alaw
> > >> > allow=ulaw
> > >> > allow=g729
> > >> > context=External
> > >> > dtmfmode=auto
> > >> > nat=no
> > >> > qualify=no
> > >> > canreinvite=yes
> > >> > username=1040
> > >> > secret=*******
> > >> >
> > >> > Regards
> > >> > Bilal