[asterisk-users] duration limits in Dial() not being enforced at correct time
Bryant Zimmerman
BryantZ at zktech.com
Thu Nov 3 08:25:09 CDT 2011
If you dial to a Local/Context and use your time limits on that and then do
your dial to your DAHDI device inside that context does that have any
effect on the time limits working. We have used time limits with
Local/Context dials and had them work with out any known issues.
Thanks
Bryant Zimmerman
----------------------------------------
From: "amit anand" <onewaytoconnect at gmail.com>
Sent: Thursday, November 03, 2011 9:18 AM
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] duration limits in Dial() not being enforced
at correct time
On Thu, Nov 3, 2011 at 18:44, Danny Nicholas <danny at debsinc.com> wrote:
Please elaborate on your "flavor" of DAHDI and LIBPRI and what type of
DAHDI
service you are using (PSTN, T1, etc). Speaking from a POTS line point of
view, there can easily be a 7-10 second delay in the processing of DAHDI
information (which would make your 1347 second call within tolerance).
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kingsley
Tart
Sent: Thursday, November 03, 2011 5:11 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] duration limits in Dial() not being enforced at
correct time
Hi,
We're trying to time-limit some calls by specifying L(x:y:z) as an option
to
the Dial command.
If we set the limit to a fairly short duration (eg 120 seconds) then
Asterisk seems to issue the hangup at about the right time.
However, for longish calls we're seeing quite a bit of overspill. For
example we tried to limit one to 1338 seconds but Asterisk didn't hang up
until 1384 seconds after the call was answered.
Also, the error is not always consistent - a second test call also limited
to 1338 seconds was hung up by Asterisk after 1347 seconds.
We saw this problem with Asterisk 1.6 but we've now tried on Asterisk
1.8.6.0 and are having the same problem.
Here's a log from the Asterisk 1.8.6.0 box for the test call that should
have been limited to 1338 seconds but was actually ended after 1384
seconds.
The server wasn't carrying any other calls at the time or doing anything
else so the load would have been very low.
[Nov 2 16:47:37] VERBOSE[2029] pbx.c: -- Executing
[01476292501 at service_nts_v2:57] Dial("DAHDI/i2/7622323283-4",
"DAHDI/g1/08451238347,,L(1338000:30000:5000)M(service-nts-v2-register-answer
)") in new stack
[Nov 2 16:47:37] VERBOSE[2029] features.c: > Limit Data for this
call:
[Nov 2 16:47:37] VERBOSE[2029] features.c: > timelimit =
1338000 ms (1338.000 s)
[Nov 2 16:47:37] VERBOSE[2029] features.c: > play_warning =
30000
ms (30.000 s)
[Nov 2 16:47:37] VERBOSE[2029] features.c: > play_to_caller = yes
[Nov 2 16:47:37] VERBOSE[2029] features.c: > play_to_callee = no
[Nov 2 16:47:37] VERBOSE[2029] features.c: > warning_freq = 5000
ms (5.000 s)
[Nov 2 16:47:37] VERBOSE[2029] features.c: > start_sound =
[Nov 2 16:47:37] VERBOSE[2029] features.c: > warning_sound =
/var/lib/asterisk/sounds/bespoke/beep_200ms
[Nov 2 16:47:37] VERBOSE[2029] features.c: > end_sound =
[Nov 2 16:47:37] VERBOSE[2029] sig_pri.c: -- Requested transfer
capability: 0x00 - SPEECH
[Nov 2 16:47:37] VERBOSE[2029] app_dial.c: -- Called
DAHDI/g1/08451238347
[Nov 2 16:47:37] VERBOSE[2029] app_dial.c: -- DAHDI/i1/08451238347-3
is
proceeding passing it to DAHDI/i2/7622323283-4
[Nov 2 16:47:37] VERBOSE[2029] app_dial.c: -- DAHDI/i1/08451238347-3
is
ringing
[Nov 2 16:47:38] VERBOSE[2029] app_dial.c: -- DAHDI/i1/08451238347-3
answered DAHDI/i2/7622323283-4
[Nov 2 16:47:38] VERBOSE[2029] pbx.c: -- Executing
[s at macro-service-nts-v2-register-answer:1] NoOp("DAHDI/i1/08451238347-3",
"ANSWER MACRO") in new stack
[Nov 2 16:47:38] VERBOSE[2029] pbx.c: -- Executing
[s at macro-service-nts-v2-register-answer:2] AGI("DAHDI/i1/08451238347-3",
"agi://127.0.0.1:4573/ServiceNTSV2,mode=answered,uniqueID=1320252457.17_1,un
iqueIDB=1320252457.18,ddi=08451238347,Goto=agiOK1") in new stack
[Nov 2 16:47:39] VERBOSE[2029] res_agi.c: -- AGI Script Executing
Application: (Goto) Options: (agiOK1)
[Nov 2 16:47:39] VERBOSE[2029] pbx.c: -- Goto
(macro-service-nts-v2-register-answer,s,7)
[Nov 2 16:47:39] VERBOSE[2029] res_agi.c: --
<DAHDI/i1/08451238347-3>AGI Script agi://127.0.0.1:4573/ServiceNTSV2
completed, returning 0
[Nov 2 16:47:39] VERBOSE[2029] pbx.c: -- Executing
[s at macro-service-nts-v2-register-answer:7]
GotoIf("DAHDI/i1/08451238347-3",
"1?agiOK2") in new stack
[Nov 2 16:47:39] VERBOSE[2029] pbx.c: -- Goto
(macro-service-nts-v2-register-answer,s,13)
[Nov 2 16:47:39] VERBOSE[2029] pbx.c: -- Executing
[s at macro-service-nts-v2-register-answer:13] NoOp("DAHDI/i1/08451238347-3",
"register-answer macro finished") in new stack
[Nov 2 16:47:39] VERBOSE[2029] chan_dahdi.c: -- Native bridging
DAHDI/i2/7622323283-4 and DAHDI/i1/08451238347-3
[Nov 2 17:10:42] VERBOSE[2029] pbx.c: -- Executing
[h at service_nts_v2:1]
NoOp("DAHDI/i2/7622323283-4", "number HANGING UP ...
CHANNEL=DAHDI/i2/7622323283-4, channel1=1320252457.17_1, channel2=,
HANGUPCAUSE=16, UNIQUEID=1320252457.17") in new stack
Is this a known problem and are there any workarounds?
--
Cheers,
Kingsley.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Hi you can use Absoulte timeout to set the time limit feature for the
channel
--
Amit Anand
+91 9818559898
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111103/dbbff122/attachment.htm>
More information about the asterisk-users
mailing list