[asterisk-users] Trying out a new version with sangoma card

[Jim Dickenson]

In asterisk CLI do "pri show spans". The fact the card is in RED alert means the hardware does not "see" the pri line connected to the card.
-- 
Jim Dickenson
mailto:dickenson at cfmc.com

CfMC
http://www.cfmc.com/



On May 11, 2011, at 6:55 PM, Nicolas Ross wrote:

> Le 2011-05-09 09:31, Jim Dickenson a écrit :
>> Make sure the firmware on the card is latest. I had a problem, not like your, and flashing the card to the latest firmware resolved it.
> It appears it did not change anything...
> 
> So, to re-cap, I have a sangoma A101 card, with the firmware uptodate, on the asterisk 1.8.3.3, dahdi-linux 2.4.1.2, and dahdi-tools 2.4.1.
> 
> When asterisk is running, cat /proc/dahdi/1 yields :
> 
> Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) B8ZS/ESF RED
> 
>           1 WPT1/0/1 Clear (In use)
>           2 WPT1/0/2 Clear (In use)
> (...)
>          24 WPT1/0/24 Hardware-assisted HDLC (In use)
> 
> And when it's not, the (In use) go away.
> 
> When, dialing I get "Unable to create channel of type 'DAHDI' (cause 34 - Circuit/channel congestion)"
> 
> So, does anybody got any idea ?
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>              http://www.asterisk.org/hello
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>  http://lists.digium.com/mailman/listinfo/asterisk-users