[asterisk-users] Trying out a new version with sangoma card

Nicolas Ross rossnick-lists at cybercat.ca
Wed May 11 20:55:22 CDT 2011


Le 2011-05-09 09:31, Jim Dickenson a écrit :
> Make sure the firmware on the card is latest. I had a problem, not like your, and flashing the card to the latest firmware resolved it.
It appears it did not change anything...

So, to re-cap, I have a sangoma A101 card, with the firmware uptodate, 
on the asterisk 1.8.3.3, dahdi-linux 2.4.1.2, and dahdi-tools 2.4.1.

When asterisk is running, cat /proc/dahdi/1 yields :

Span 1: WPT1/0 "wanpipe1 card 0" (MASTER) B8ZS/ESF RED

            1 WPT1/0/1 Clear (In use)
            2 WPT1/0/2 Clear (In use)
(...)
           24 WPT1/0/24 Hardware-assisted HDLC (In use)

And when it's not, the (In use) go away.

When, dialing I get "Unable to create channel of type 'DAHDI' (cause 34 
- Circuit/channel congestion)"

So, does anybody got any idea ?



More information about the asterisk-users mailing list