[asterisk-users] First go at a stock 1.8 install -- where's DAHDI?

Ken D'Ambrosio ken at jots.org
Sun Feb 20 09:57:52 CST 2011


You -- as usual -- hit the nail on the head; I'd actually figured it out
at probably roughly the same time as you e-mailed, because I bumped into
this:

       Asterisk Module and Build Option Selection
[...]
XXX chan_dahdi
[...]
    DAHDI Telephony
    Depends on: dahdi(E), tonezone(E)
    Can use: res_smdi(M), pri(E), ss7(E), openr2(E)

So, I'm using this with a Sangoma A102D; I'm not sure what the "E"
(external?) vs. the "M" (module?) is about; I've compiled dahdi and
tonezone -- how do I verify where the missing dependency lies?

Thanks (yet again, all),

-Ken




On Sun, February 20, 2011 10:38 am, Tzafrir Cohen wrote:
> On Sat, Feb 19, 2011 at 04:15:15PM -0500, Ken D'Ambrosio wrote:
>
>> Hi, all.  I've finally made the jump from 1.4 to 1.8.  I've installed
>> everything (I think), my Sangoma card initializes right... but there's
>> no "dahdi" command -- not from the base, nor as a subset of the "core"
>> commands.  I've got my channels configured in my chan_dahdi.conf file.
>> What am I missing, here?
>>
>
> This may be caused by one of two things:
>
>
> 1. You have not built chan_dahdi.so
> 2. You built chan_dahdi.so, but it has failed to load (normally because
> of broken configuration)
>
> Try running the following from the Asterisk CLI (rasterisk):
>
>
>
> module unload chan_dahdi.so
>
> That one will likely give an error message. Ignore it.
>
>
> module load chan_dahdi.so
>
> What error do you get from that?
>
>
> --
> Tzafrir Cohen
> icq#16849755              jabber:tzafrir.cohen at xorcom.com +972-50-7952406
> mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
>
> asterisk-users mailing list To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
>








More information about the asterisk-users mailing list