[asterisk-users] function Echo() doesn't work

[Faisal Hanif]

Did you make any peer for sipgate if yes then do for that peers. Please also note that disallow line should be before allow line.

 

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Felix Dong
Sent: Wednesday, February 16, 2011 6:22 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] function Echo() doesn't work

 

I tried to set allow=all in sip.conf. But it still doesn't work.



2011/2/16 Faisal Hanif <faisal at vopium.com>

I faced same issue for sipgate but got it resolved by allowing all codec in sipgate peer config.

 

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Felix Dong
Sent: Wednesday, February 16, 2011 5:33 PM


To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] function Echo() doesn't work

 

 == Using SIP RTP CoS mark 5

    -- Executing [1174614 at von-voip-provider:1] Answer("SIP/sipgate-account-00000000", "") in new stack

    -- Executing [1174614 at von-voip-provider:2] Echo("SIP/sipgate-account-00000000", "") in new stack

  == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on 'SIP/sipgate-account-00000000'

 

 

here is the log. It is as same as I got from CAPI and Datacard. I just didn't hear the echo from SIP connection.



2011/2/16 Faisal Hanif <faisal at vopium.com>

Check if you have incoming SIP call in supported codec or send CLI log for further troubleshooting.

 

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Felix Dong
Sent: Wednesday, February 16, 2011 5:14 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] function Echo() doesn't work

 

Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS Stick). Just only no echo on SIP. Any suggestion?

2011/2/16 Faisal Hanif <faisal at vopium.com>

Did you executed Answer() before it?

 

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Felix Dong
Sent: Wednesday, February 16, 2011 4:48 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] function Echo() doesn't work

 

Hi guys, 

 

the function Echo() did work on CAPI, but doesn't work for SIP connection. Can anybody help?

thanks a lot.

 

best regards,

 

Felix


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110216/b7bf78b1/attachment.htm>