[asterisk-users] function Echo() doesn't work

Felix Dong felix.dong at gmail.com
Wed Feb 16 07:22:13 CST 2011


I tried to set allow=all in sip.conf. But it still doesn't work.


2011/2/16 Faisal Hanif <faisal at vopium.com>

> I faced same issue for sipgate but got it resolved by allowing all codec in
> sipgate peer config.
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Felix Dong
> *Sent:* Wednesday, February 16, 2011 5:33 PM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] function Echo() doesn't work
>
>
>
> * == Using SIP RTP CoS mark 5*
>
> *    -- Executing [1174614 at von-voip-provider:1]
> Answer("SIP/sipgate-account-00000000", "") in new stack*
>
> *    -- Executing [1174614 at von-voip-provider:2]
> Echo("SIP/sipgate-account-00000000", "") in new stack*
>
> *  == Spawn extension (von-voip-provider, 1174614, 2) exited non-zero on
> 'SIP/sipgate-account-00000000'*
>
>
>
>
>
> here is the log. It is as same as I got from CAPI and Datacard. I just
> didn't hear the echo from SIP connection.
>
>
> 2011/2/16 Faisal Hanif <faisal at vopium.com>
>
> Check if you have incoming SIP call in supported codec or send CLI log for
> further troubleshooting.
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Felix Dong
> *Sent:* Wednesday, February 16, 2011 5:14 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] function Echo() doesn't work
>
>
>
> Yes, I did it. The function Echo() works both on CAPI and Datacard (UMTS
> Stick). Just only no echo on SIP. Any suggestion?
>
> 2011/2/16 Faisal Hanif <faisal at vopium.com>
>
> Did you executed Answer() before it?
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Felix Dong
> *Sent:* Wednesday, February 16, 2011 4:48 PM
> *To:* asterisk-users at lists.digium.com
> *Subject:* [asterisk-users] function Echo() doesn't work
>
>
>
> Hi guys,
>
>
>
> the function Echo() did work on CAPI, but doesn't work for SIP connection.
> Can anybody help?
>
> thanks a lot.
>
>
>
> best regards,
>
>
>
> Felix
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110216/e8526d60/attachment-0001.htm>


More information about the asterisk-users mailing list