[asterisk-users] YELLOW alarm
Sébastien BERGER
sebastien at ab2l.eu
Mon Feb 14 05:17:52 CST 2011
As I know it's only telco who provide the clock. Then you must configure
your span with 1,1,0
1 is as TE (terminal equipment)
0 is as NT (network termination)
So, configure your span as TE, be sure telco not use crc4.
If already yellow, call your telco and ask him if he provide clock or not.
Just to be sure, verify your E1 cable. It's a crossover ?
Regards,
Sebastien BERGER
AB2L
+33 (0)367100783
sebastien at ab2l.eu
Le 14/02/2011 11:50, Albert a écrit :
> Hi,
>
> span 1 - e1 line (15 channels)
> span 2 - nothing is connected to 2nd span
>
> below is also status from proc fs
>
> ps. i was also trying with timing provided by card (0)
> span=1,1,0,ccs,hdb3
> ...
> but result was the same
>
>
> voice:/tmp# cat /proc/dahdi/1
> Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS YELLOW
>
> 1 TE2/0/1/1 Clear YELLOW(SWEC: MG2)
> 2 TE2/0/1/2 Clear YELLOW(SWEC: MG2)
> 3 TE2/0/1/3 Clear YELLOW(SWEC: MG2)
> 4 TE2/0/1/4 Clear YELLOW(SWEC: MG2)
> 5 TE2/0/1/5 Clear YELLOW(SWEC: MG2)
> 6 TE2/0/1/6 Clear YELLOW(SWEC: MG2)
> 7 TE2/0/1/7 Clear YELLOW(SWEC: MG2)
> 8 TE2/0/1/8 Clear YELLOW(SWEC: MG2)
> 9 TE2/0/1/9 Clear YELLOW(SWEC: MG2)
> 10 TE2/0/1/10 Clear YELLOW(SWEC: MG2)
> 11 TE2/0/1/11 Clear YELLOW(SWEC: MG2)
> 12 TE2/0/1/12 Clear YELLOW(SWEC: MG2)
> 13 TE2/0/1/13 Clear YELLOW(SWEC: MG2)
> 14 TE2/0/1/14 Clear YELLOW(SWEC: MG2)
> 15 TE2/0/1/15 Clear YELLOW(SWEC: MG2)
> 16 TE2/0/1/16 HDLCFCS YELLOW
> 17 TE2/0/1/17 Clear YELLOW(SWEC: MG2)
> 18 TE2/0/1/18 Clear YELLOW(SWEC: MG2)
> 19 TE2/0/1/19 Clear YELLOW(SWEC: MG2)
> 20 TE2/0/1/20 Clear YELLOW(SWEC: MG2)
> 21 TE2/0/1/21 Clear YELLOW(SWEC: MG2)
> 22 TE2/0/1/22 Clear YELLOW(SWEC: MG2)
> 23 TE2/0/1/23 Clear YELLOW(SWEC: MG2)
> 24 TE2/0/1/24 Clear YELLOW(SWEC: MG2)
> 25 TE2/0/1/25 Clear YELLOW(SWEC: MG2)
> 26 TE2/0/1/26 Clear YELLOW(SWEC: MG2)
> 27 TE2/0/1/27 Clear YELLOW(SWEC: MG2)
> 28 TE2/0/1/28 Clear YELLOW(SWEC: MG2)
> 29 TE2/0/1/29 Clear YELLOW(SWEC: MG2)
> 30 TE2/0/1/30 Clear YELLOW(SWEC: MG2)
> 31 TE2/0/1/31 Clear YELLOW(SWEC: MG2)
>
> voice:/tmp# cat /proc/dahdi/2
> Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS RED
>
> 32 TE2/0/2/1 Clear RED(SWEC: MG2)
> 33 TE2/0/2/2 Clear RED(SWEC: MG2)
> 34 TE2/0/2/3 Clear RED(SWEC: MG2)
> 35 TE2/0/2/4 Clear RED(SWEC: MG2)
> 36 TE2/0/2/5 Clear RED(SWEC: MG2)
> 37 TE2/0/2/6 Clear RED(SWEC: MG2)
> 38 TE2/0/2/7 Clear RED(SWEC: MG2)
> 39 TE2/0/2/8 Clear RED(SWEC: MG2)
> 40 TE2/0/2/9 Clear RED(SWEC: MG2)
> 41 TE2/0/2/10 Clear RED(SWEC: MG2)
> 42 TE2/0/2/11 Clear RED(SWEC: MG2)
> 43 TE2/0/2/12 Clear RED(SWEC: MG2)
> 44 TE2/0/2/13 Clear RED(SWEC: MG2)
> 45 TE2/0/2/14 Clear RED(SWEC: MG2)
> 46 TE2/0/2/15 Clear RED(SWEC: MG2)
> 47 TE2/0/2/16 HDLCFCS RED
> 48 TE2/0/2/17 Clear RED(SWEC: MG2)
> 49 TE2/0/2/18 Clear RED(SWEC: MG2)
> 50 TE2/0/2/19 Clear RED(SWEC: MG2)
> 51 TE2/0/2/20 Clear RED(SWEC: MG2)
> 52 TE2/0/2/21 Clear RED(SWEC: MG2)
> 53 TE2/0/2/22 Clear RED(SWEC: MG2)
> 54 TE2/0/2/23 Clear RED(SWEC: MG2)
> 55 TE2/0/2/24 Clear RED(SWEC: MG2)
> 56 TE2/0/2/25 Clear RED(SWEC: MG2)
> 57 TE2/0/2/26 Clear RED(SWEC: MG2)
> 58 TE2/0/2/27 Clear RED(SWEC: MG2)
> 59 TE2/0/2/28 Clear RED(SWEC: MG2)
> 60 TE2/0/2/29 Clear RED(SWEC: MG2)
> 61 TE2/0/2/30 Clear RED(SWEC: MG2)
> 62 TE2/0/2/31 Clear RED(SWEC: MG2)
>
>
>
> Albert
>
> On 14.02.2011 11:39, Sébastien BERGER wrote:
>> Hello,
>>
>> Can you say us what is connected in which span ?
>>
>> span 1 =
>> span 2 =
>>
>> Yellow would say that the span did not receive external clock
>>
>> Sebastien
>>
>> AB2L
>> +33 (0)367100783
>> sebastien at ab2l.eu
>>
>>
>> Le 14/02/2011 11:34, Albert a écrit :
>>> Hi guys,
>>>
>>> I am getting YELLOW alarm on my span with E1 line. Anyone knows what
>>> could be the problem ? Below is my config and status...
>>>
>>> voice:/etc/dahdi# dahdi_hardware -v
>>> pci:0000:02:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen)
>>>
>>>
>>> voice:/etc/dahdi# dahdi_scan
>>> [1]
>>> active=yes
>>> alarms=YEL
>>> description=T2XXP (PCI) Card 0 Span 1
>>> name=TE2/0/1
>>> manufacturer=Digium
>>> devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
>>> location=Board ID Switch 0
>>> basechan=1
>>> totchans=31
>>> irq=16
>>> type=digital-E1
>>> syncsrc=0
>>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>>> coding_opts=AMI,HDB3
>>> framing_opts=CCS,CRC4
>>> coding=HDB3
>>> framing=CCS
>>> [2]
>>> <cut> ....</cut>
>>>
>>> voice:/etc/dahdi# cat system.conf
>>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>> span=1,1,0,ccs,hdb3
>>> bchan=1-15,17-31
>>> dchan=16
>>> echocanceller=mg2,1-15,17-31
>>>
>>> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>>> # span=2,0,0,ccs,hdb3,crc4,yellow
>>> span=2,0,0,ccs,hdb3
>>> bchan=32-46,48-62
>>> dchan=47
>>> echocanceller=mg2,32-46,48-62
>>>
>>> # Global data
>>>
>>> loadzone = uk
>>> defaultzone = uk
>>>
>>>
>>>
>>>
>>>
>>> ps1. I am using DAHDI drivers in version 2.4.0
>>>
>>> ps2. in attachment screen from dahdi_tool
>>>
>>> Any help will do.
>>>
>>> Thanks,
>>> Alebert
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>> http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list