[asterisk-users] YELLOW alarm
Albert
alberton at wp.pl
Mon Feb 14 04:50:51 CST 2011
Hi,
span 1 - e1 line (15 channels)
span 2 - nothing is connected to 2nd span
below is also status from proc fs
ps. i was also trying with timing provided by card (0)
span=1,1,0,ccs,hdb3
...
but result was the same
voice:/tmp# cat /proc/dahdi/1
Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS YELLOW
1 TE2/0/1/1 Clear YELLOW(SWEC: MG2)
2 TE2/0/1/2 Clear YELLOW(SWEC: MG2)
3 TE2/0/1/3 Clear YELLOW(SWEC: MG2)
4 TE2/0/1/4 Clear YELLOW(SWEC: MG2)
5 TE2/0/1/5 Clear YELLOW(SWEC: MG2)
6 TE2/0/1/6 Clear YELLOW(SWEC: MG2)
7 TE2/0/1/7 Clear YELLOW(SWEC: MG2)
8 TE2/0/1/8 Clear YELLOW(SWEC: MG2)
9 TE2/0/1/9 Clear YELLOW(SWEC: MG2)
10 TE2/0/1/10 Clear YELLOW(SWEC: MG2)
11 TE2/0/1/11 Clear YELLOW(SWEC: MG2)
12 TE2/0/1/12 Clear YELLOW(SWEC: MG2)
13 TE2/0/1/13 Clear YELLOW(SWEC: MG2)
14 TE2/0/1/14 Clear YELLOW(SWEC: MG2)
15 TE2/0/1/15 Clear YELLOW(SWEC: MG2)
16 TE2/0/1/16 HDLCFCS YELLOW
17 TE2/0/1/17 Clear YELLOW(SWEC: MG2)
18 TE2/0/1/18 Clear YELLOW(SWEC: MG2)
19 TE2/0/1/19 Clear YELLOW(SWEC: MG2)
20 TE2/0/1/20 Clear YELLOW(SWEC: MG2)
21 TE2/0/1/21 Clear YELLOW(SWEC: MG2)
22 TE2/0/1/22 Clear YELLOW(SWEC: MG2)
23 TE2/0/1/23 Clear YELLOW(SWEC: MG2)
24 TE2/0/1/24 Clear YELLOW(SWEC: MG2)
25 TE2/0/1/25 Clear YELLOW(SWEC: MG2)
26 TE2/0/1/26 Clear YELLOW(SWEC: MG2)
27 TE2/0/1/27 Clear YELLOW(SWEC: MG2)
28 TE2/0/1/28 Clear YELLOW(SWEC: MG2)
29 TE2/0/1/29 Clear YELLOW(SWEC: MG2)
30 TE2/0/1/30 Clear YELLOW(SWEC: MG2)
31 TE2/0/1/31 Clear YELLOW(SWEC: MG2)
voice:/tmp# cat /proc/dahdi/2
Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS RED
32 TE2/0/2/1 Clear RED(SWEC: MG2)
33 TE2/0/2/2 Clear RED(SWEC: MG2)
34 TE2/0/2/3 Clear RED(SWEC: MG2)
35 TE2/0/2/4 Clear RED(SWEC: MG2)
36 TE2/0/2/5 Clear RED(SWEC: MG2)
37 TE2/0/2/6 Clear RED(SWEC: MG2)
38 TE2/0/2/7 Clear RED(SWEC: MG2)
39 TE2/0/2/8 Clear RED(SWEC: MG2)
40 TE2/0/2/9 Clear RED(SWEC: MG2)
41 TE2/0/2/10 Clear RED(SWEC: MG2)
42 TE2/0/2/11 Clear RED(SWEC: MG2)
43 TE2/0/2/12 Clear RED(SWEC: MG2)
44 TE2/0/2/13 Clear RED(SWEC: MG2)
45 TE2/0/2/14 Clear RED(SWEC: MG2)
46 TE2/0/2/15 Clear RED(SWEC: MG2)
47 TE2/0/2/16 HDLCFCS RED
48 TE2/0/2/17 Clear RED(SWEC: MG2)
49 TE2/0/2/18 Clear RED(SWEC: MG2)
50 TE2/0/2/19 Clear RED(SWEC: MG2)
51 TE2/0/2/20 Clear RED(SWEC: MG2)
52 TE2/0/2/21 Clear RED(SWEC: MG2)
53 TE2/0/2/22 Clear RED(SWEC: MG2)
54 TE2/0/2/23 Clear RED(SWEC: MG2)
55 TE2/0/2/24 Clear RED(SWEC: MG2)
56 TE2/0/2/25 Clear RED(SWEC: MG2)
57 TE2/0/2/26 Clear RED(SWEC: MG2)
58 TE2/0/2/27 Clear RED(SWEC: MG2)
59 TE2/0/2/28 Clear RED(SWEC: MG2)
60 TE2/0/2/29 Clear RED(SWEC: MG2)
61 TE2/0/2/30 Clear RED(SWEC: MG2)
62 TE2/0/2/31 Clear RED(SWEC: MG2)
Albert
On 14.02.2011 11:39, Sébastien BERGER wrote:
> Hello,
>
> Can you say us what is connected in which span ?
>
> span 1 =
> span 2 =
>
> Yellow would say that the span did not receive external clock
>
> Sebastien
>
> AB2L
> +33 (0)367100783
> sebastien at ab2l.eu
>
>
> Le 14/02/2011 11:34, Albert a écrit :
>> Hi guys,
>>
>> I am getting YELLOW alarm on my span with E1 line. Anyone knows what
>> could be the problem ? Below is my config and status...
>>
>> voice:/etc/dahdi# dahdi_hardware -v
>> pci:0000:02:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen)
>>
>>
>> voice:/etc/dahdi# dahdi_scan
>> [1]
>> active=yes
>> alarms=YEL
>> description=T2XXP (PCI) Card 0 Span 1
>> name=TE2/0/1
>> manufacturer=Digium
>> devicetype=Wildcard TE220 (5th Gen) (VPMOCT064)
>> location=Board ID Switch 0
>> basechan=1
>> totchans=31
>> irq=16
>> type=digital-E1
>> syncsrc=0
>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>> coding_opts=AMI,HDB3
>> framing_opts=CCS,CRC4
>> coding=HDB3
>> framing=CCS
>> [2]
>> <cut> ....</cut>
>>
>> voice:/etc/dahdi# cat system.conf
>> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>> span=1,1,0,ccs,hdb3
>> bchan=1-15,17-31
>> dchan=16
>> echocanceller=mg2,1-15,17-31
>>
>> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>> # span=2,0,0,ccs,hdb3,crc4,yellow
>> span=2,0,0,ccs,hdb3
>> bchan=32-46,48-62
>> dchan=47
>> echocanceller=mg2,32-46,48-62
>>
>> # Global data
>>
>> loadzone = uk
>> defaultzone = uk
>>
>>
>>
>>
>>
>> ps1. I am using DAHDI drivers in version 2.4.0
>>
>> ps2. in attachment screen from dahdi_tool
>>
>> Any help will do.
>>
>> Thanks,
>> Alebert
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list