[asterisk-users] sangoma wanpipe install error

[Roi Stork]

Trying to install wanpipe 3.5.18.

No errors during compile. But when I reach the point where wanpipe and
dahdi_cfg is started, I encountered an error.

Starting WAN Router...
Loading WAN drivers: wanpipe done.
Starting up device: wanpipe1


       wanconfig: WAN device wanpipe1 driver load failed !!
                : ioctl(wanpipe1,ROUTER_SETUP) failed:
                :      22 - Invalid argument


       Wanpipe driver did not load properly
       Please check /var/log/wanrouter and
       /var/log/messages for errors

Configuring interfaces: w1g1 w1g1: ERROR while getting interface flags: No
such device

done.
/etc/wanpipe/scripts/start: 7: Syntax error: Bad for loop variable

DAHDI_SPANCONFIG failed on span 1: No such device
or address (6)

Dont know why I still keep getting a 'No such device' error even if the
device was detected (Sangoma a104de, setup asked to configure/skip the 4
ports) before the error happened.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110211/49a79054/attachment.htm>