Trying to install wanpipe 3.5.18.<br><br>No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error.<br><br><div style="margin-left: 40px;"><font size="1">Starting WAN Router...<br>
Loading WAN drivers: wanpipe done.<br>Starting up device: wanpipe1<br><br><br>        wanconfig: WAN device wanpipe1 driver load failed !!<br>                 : ioctl(wanpipe1,ROUTER_SETUP) failed:<br>                 :      22 - Invalid argument<br>
<br><br>        Wanpipe driver did not load properly<br>        Please check /var/log/wanrouter and<br>        /var/log/messages for errors<br><br>Configuring interfaces: w1g1 w1g1: ERROR while getting interface flags: No<br>
such device<br><br>done.<br>/etc/wanpipe/scripts/start: 7: Syntax error: Bad for loop variable<br><br>DAHDI_SPANCONFIG failed on span 1: No such device<br>or address (6)<br></font></div><font size="1"><br></font>Dont know why I still keep getting a &#39;No such device&#39; error even if the device was detected (Sangoma a104de, setup asked to configure/skip the 4 ports) before the error happened.<br>