[asterisk-users] T.38 passthru on 1.8.5

[Fabian Borot]

 Hello
We want to implement T.38 passthru with asterisk 1.8.5 [Asterisk 1.8.5.0 built by root @ asterisk1-8.labdomain.com on a x86_64 running Linux on 2011-08-26 21:31:22 UTC]

The call flow is:
quintum gateway --> asterisk --> Dialogic IMG 1010

the call starts as a voice call, the remote fax picks up and we hear the fax tone, the we see the re-invite from the IMG asking for t.38, the RE-Invite is passed back to the user side [quintum gateway] whcih reply with 200 OK with t.38 and the nothing else happens. After 20 secs of "inactivity" the quintum sends another Invite with voice only and then a BYE.

We do see that the quintum sends a lot of messages like this from the quintum's IP [192.168.1.18] but we do not see that asterisk sends the packages to the destination

UDPTL (SIP/2345850624337933): packet to 192.30.189.146:12020 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)
 UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)

we have this settings on sip.conf
faxdetect = yes
t38pt_udptl = yes,maxdatagram=400 [I have tested with several combinations t38pt_udptl = yes;t38pt_udptl = yes,fec etc]

When we send the fax from the quintum to the Dialogic IMG the fax works 100% of the times.
I enabled fax set debug on and udptl set debug on but the console does not show almost anything but the udptl packets shown above.
What else should I do?Any ideas/help is greatly appreciated

txs a lot
fborot

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110830/9d68ce48/attachment.htm>