<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'><div dir='ltr'>
<br><div>
<div> Hello<br>We want to implement T.38 passthru with asterisk 1.8.5 [Asterisk 1.8.5.0 built by root @ asterisk1-8.labdomain.com on a x86_64 running Linux on 2011-08-26 21:31:22 UTC]<br><br>The call flow is:<br>quintum gateway --> asterisk --> Dialogic IMG 1010<br><br>the call starts as a voice call, the remote fax picks up and we hear the fax tone, the we see the re-invite from the IMG asking for t.38, the RE-Invite is passed back to the user side [quintum gateway] whcih reply with 200 OK with t.38 and the nothing else happens. After 20 secs of "inactivity" the quintum sends another Invite with voice only and then a BYE.<br><br>We do see that the quintum sends a lot of messages like this from the quintum's IP [192.168.1.18] but we do not see that asterisk sends the packages to the destination<br><br>UDPTL (SIP/2345850624337933): packet to 192.30.189.146:12020 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br> UDPTL (SIP/): packet from 192.168.1.18:10260 (type 0, seq 0, len 6)<br><br>we have this settings on sip.conf<br>faxdetect = yes<br>t38pt_udptl = yes,maxdatagram=400 [I have tested with several combinations t38pt_udptl = yes;t38pt_udptl = yes,fec etc]<br><br>When we send the fax from the quintum to the Dialogic IMG the fax works 100% of the times.<br>I enabled fax set debug on and udptl set debug on but the console does not show almost anything but the udptl packets shown above.<br>What else should I do?Any ideas/help is greatly appreciated<br><br>txs a lot<br>fborot<br><br></div></div> </div></body>
</html>