[asterisk-users] One way audio when overlapdial is set to yes

leonimar cape leo_mac_ph at yahoo.com
Wed Sep 15 05:49:36 CDT 2010


Hi Group,

I was able to resolve the problem by disabling the echo cancellation in a104d 
and using the same dahdi config.


Thanks...


----- Original Message ----
> From: leonimar cape <leo_mac_ph at yahoo.com>
> To: asterisk-users at lists.digium.com
> Sent: Wednesday, September 15, 2010 6:12:35 PM
> Subject: [asterisk-users] One way audio when overlapdial is set to yes
> 
> Hi Group,
> 
> 
> I am currently facing a dead end and any help will be much  appreciated.
> 
> I have an a104d installed in an asterisk box, two of which  is configured on 
>ISDN 
>
> pri. One is facing pstn and the other one is facing a  hipath 300e Siemens. I 
>am 
>
> getting one way audio when a local on the hipath  tries to make a pstn call but 
>
> no issue on incoming calls from pstn going to  the hipath locals.
> 
> local ---> hipath 300 --------- isdn pri --------  asterisk ---------- isdn pri 
>
> --------- telco--> dest.
> 
> Here is my  dahdi  config
> 
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> overlapdial=yes
> autofalltrought=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> 
> ;  Span 2: WPE1/1 "wanpipe2 card 1" HDB3/CCS/CRC4  RED
> group=1,12
> context=from-internal
> switchtype =  euroisdn
> ;overlapdial = outgoing
> priindication = inband
> signalling =  pri_net
> channel => 32-46,48-62
> context = default
> group =  63
> 
> 
> 
>  Span 4: WPE1/3 "wanpipe4 card 3" HDB3/CCS/CRC4 
> group=4,14
> context=outrt-001-PSTN_E1
> switchtype=qsig
> signalling=pri_cpe
> ;facilityenable=yes
> ;callprogress=yes
> pridialplan=unknown
> prilocaldialplan=unknown
> ;priindication  = outofband
> ;overlapdial = incoming
> ;priexclusive = yes
> ;pritimer  => t200,1000
> ;pritimer => t313,4000
> ;immediate=yes
> channel =>  94-108,110-124
> context = default
> group = 63
> 
> 
> Any suggestion will  be much appreciated.
> 
> Regards,
> 
> Mac
> 
> 
> 
> -- 
> _____________________________________________________________________
> --  Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for  a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
> 
> asterisk-users mailing list
> To  UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 





More information about the asterisk-users mailing list