[asterisk-users] No SIP requests coming in with Allow Anonymous SIP set to OFF - If set to ON it all SIP DEBUG show the requests just fine - Where is the problem?

[Faisal Hanif]

  Allow anonymous SIP and enable debug then check if calls coming from 
same IP which you have configured in peer?

Regards,

Faisal Hanif//


On 9/11/2010 8:07 AM, bruce bruce wrote:
> Hi Everyone,
>
> I have a provider whose DID used to come into the box just fine but 
> recently stopped working. Nothing has been changed on our end.
>
> Here is what I get when doing "sip set debug peer PROVIDER":
>
> Sending to 123.123.123.123 : 5060 (no NAT)
>
> ^^^^ That is ALL I am getting with sip debug turned on.
>
> With Allow Anonymous SIP set to YES, then the call comes in properly 
> and you see the ACK, REQUEST and ACCEPT of sip debug just fine.
>
> This is Elastix with Asterisk 1.4.33.1
>
> Any thoughts?
>
> Thanks
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100911/e700bd8a/attachment.htm