[asterisk-users] S110M not working

Noah Miller noahisaacmiller at gmail.com
Tue Nov 16 13:41:20 CST 2010


>> I'm just thinking that the failure that dahdi_scan see may be because
>> the s110 isn't getting power.
>
> If you see "FAILED" in dahdi_scan for the FXS port, then most likely
> there will be some indication of what actually failed in the kernel log.
>  Is there anything in dmesg?

Aha!  Thanks, Shaun.  dmesg says: ProSLIC on module 3 failed to
powerup within 501 ms (0 mV only)

That certainly looks like a power issue to me.

So, next question, why is it not getting power if all the leads are
connected?  I guess it's time to do the get out the current meter.


Thanks!
Noah



More information about the asterisk-users mailing list